Search found 65 matches
- Fri Jul 07, 2023 3:23 pm
- Forum: General BS Area
- Topic: Looking into portable fridges and power
- Replies: 1
- Views: 2569
Looking into portable fridges and power
I have been looking into portable fridges to add to our Bronco we ordered. The downside is there are no dial battery setups for the new broncos. Would a smaller agm and a 100w solar panel really have us set? Would we really need a dc-dc charger?
- Thu May 20, 2021 5:19 am
- Forum: General BS Area
- Topic: Bench Racing for a new Wheeler
- Replies: 5
- Views: 3532
Re: Bench Racing for a new Wheeler
So JL over a JK it is I guess. I was looking at maybe the 4cyl. I like the idea of something boosted if we are going to take it up in elevation alot. Honestly we are not looking for something super cable as a rig but the wife has declared it needs 4 doors to make getting Little C in and out easier. ...
- Wed May 12, 2021 7:01 pm
- Forum: General BS Area
- Topic: Bench Racing for a new Wheeler
- Replies: 5
- Views: 3532
Re: Bench Racing for a new Wheeler
Daily duties will still be the Denali and CRV...both are good in Tri Cities snow.
I'll look into the JLs more. I do like the 10 speed in the gmc
I'll look into the JLs more. I do like the 10 speed in the gmc
- Tue May 11, 2021 12:43 pm
- Forum: General BS Area
- Topic: Bench Racing for a new Wheeler
- Replies: 5
- Views: 3532
Bench Racing for a new Wheeler
so with the need for more than 2 seats we are looking for a new wheeler.....for in a couple years maybe once we are more mobile. We would like something for "light" "overlanding" (meaning car camping so a back seat and space for camping gear) Not a hardcore wheeler - While Rubico...
- Sun Jan 27, 2019 8:47 pm
- Forum: General BS Area
- Topic: Sanderson Heaers
- Replies: 7
- Views: 4803
Re: Sanderson Heaers
quick question or two...
do they hit the block portion of the bellhousing or down by the inspection cover? I know on most the S10 V8 swap headers you have to cut the "ears" off the automatic transmissions to make the headers fit.
Got pics of your fitment issue?
do they hit the block portion of the bellhousing or down by the inspection cover? I know on most the S10 V8 swap headers you have to cut the "ears" off the automatic transmissions to make the headers fit.
Got pics of your fitment issue?
- Fri Oct 12, 2018 3:13 pm
- Forum: For Sale and Wanted
- Topic: Anyone have an Axle Alignment Bar
- Replies: 2
- Views: 3017
Re: Anyone have an Axle Alignment Bar
I know a guy with one but it might be in use right now. I'll talk to him and get the info.
- Thu Sep 20, 2018 10:44 am
- Forum: General BS Area
- Topic: Shop building
- Replies: 2
- Views: 3179
Shop building
So I might need to push up my schedule for a shop. Trying to find a good builder for a stick built shop in the 24x24 range and finished out to match our house. Just needs power roughed in and all dried in. Anyone have a recommended guy? Looking to build in spring if I can.
- Sun Sep 16, 2018 7:28 pm
- Forum: General BS Area
- Topic: Cleaning out an estate
- Replies: 3
- Views: 3572
Cleaning out an estate
So two weeks ago my father passed away and part of the legacy he left me was his massive collection of "stuff" We currently have a dozen or so chainsaws stacked on a pallet (two are farm bosses...one old enough to not have a safety on it) A bakers dozen of compact tractors (mostly diesel p...
- Thu Jun 07, 2018 7:08 am
- Forum: General BS Area
- Topic: Washington backcountry discovery route.
- Replies: 36
- Views: 19362
Re: Washington backcountry discovery route.
sounds good to me.
- Tue Jun 05, 2018 1:23 pm
- Forum: General BS Area
- Topic: Washington backcountry discovery route.
- Replies: 36
- Views: 19362
Re: Washington backcountry discovery route.
We are out of town again this weekend so Monday the 11th or later is good.
- Mon May 21, 2018 10:28 am
- Forum: General BS Area
- Topic: Washington backcountry discovery route.
- Replies: 36
- Views: 19362
Re: Washington backcountry discovery route.
So do we need a planning meeting?
- Fri Mar 23, 2018 9:20 pm
- Forum: For Sale and Wanted
- Topic: Smitty XRC8 winch. FREE to PP member
- Replies: 3
- Views: 1148
Re: Smitty XRC8 winch. FREE to PP member
You drove a hard bargain Dave. I almost had to call the boss to approve the purchase.
BTW parts are on order and should be here mid week. I am not sure I came out ahead as this is the worst grease I have ever dealt with. almost have it all cleaned out to repack and assemble when the parts get in.
BTW parts are on order and should be here mid week. I am not sure I came out ahead as this is the worst grease I have ever dealt with. almost have it all cleaned out to repack and assemble when the parts get in.
- Thu Mar 22, 2018 7:59 pm
- Forum: For Sale and Wanted
- Topic: TJ D44
- Replies: 3
- Views: 1232
TJ D44
A friend in W. Richland has a TJ rear 44 with a old school arb that needs gears collecting dust in his shop. Not sure on price but can pass along his info if anyone is interested
- Sun Mar 18, 2018 8:53 pm
- Forum: General BS Area
- Topic: New Family Member
- Replies: 5
- Views: 4339
Re: New Family Member
They grow up so fast!! http://img.photobucket.com/albums/v701/purf_man/El%20Negro%20Bandita/20170905_164445_zpspwvqsbil.jpg http://img.photobucket.com/albums/v701/purf_man/El%20Negro%20Bandita/20171017_184557_zps9y97j1x6.jpg http://img.photobucket.com/albums/v701/purf_man/El%20Negro%20Bandita/201803...
- Thu Jan 11, 2018 6:56 pm
- Forum: General BS Area
- Topic: Washington backcountry discovery route.
- Replies: 36
- Views: 19362
Re: Washington backcountry discovery route.
south to north. I think getting farther north you have more exit options if you run short on time. Or if you get north early it would be a nice place to chill for a bit.
- Wed Nov 15, 2017 3:40 pm
- Forum: Recent Run Reports - All Other Runs
- Topic: Naches trail 10-14-17
- Replies: 2
- Views: 3638
Re: Naches trail 10-14-17
I ran this trail with some friends that day (wagons east looked like it was going to be a big group)
had a BLAST in the fresh snow!!
had a BLAST in the fresh snow!!
- Thu Oct 26, 2017 2:16 pm
- Forum: For Sale and Wanted
- Topic: 5 trailer tires on wheels
- Replies: 0
- Views: 997
5 trailer tires on wheels
205 70 15 C range.
5x4.5"
I needed rollers for my fairlane in TN so upgraded to some D's. Have maybe 10k on them. Came off my 2015 trailer.
$200
5x4.5"
I needed rollers for my fairlane in TN so upgraded to some D's. Have maybe 10k on them. Came off my 2015 trailer.
$200
- Wed Sep 27, 2017 4:53 pm
- Forum: General BS Area
- Topic: rumor control
- Replies: 7
- Views: 2307
Re: rumor control
I heard a few months ago they were looking for a Kennewick store to open.
- Wed Aug 16, 2017 2:49 pm
- Forum: General BS Area
- Topic: New Family Member
- Replies: 5
- Views: 4339
Re: New Family Member
78.
needs some floors and a little hammer/dolly work on a corner and then it should be ready for a scuff and shoot.
Picking up front clip sheetmetal tonight from media blaster and getting it in some primer. Friday the subframe will be ready and it is getting the same treatment.
needs some floors and a little hammer/dolly work on a corner and then it should be ready for a scuff and shoot.
Picking up front clip sheetmetal tonight from media blaster and getting it in some primer. Friday the subframe will be ready and it is getting the same treatment.
- Sat Aug 05, 2017 10:42 am
- Forum: General BS Area
- Topic: New Family Member
- Replies: 5
- Views: 4339
New Family Member
Sara mentioned that she would like to adopt so we started the process. Last weekend our dreams came true. http://img.photobucket.com/albums/v701/purf_man/El%20Negro%20Bandita/20170730_140458_zps34mjx9eb.jpg Two proud Parents http://img.photobucket.com/albums/v701/purf_man/El%20Negro%20Bandita/201707...
- Fri May 26, 2017 11:34 am
- Forum: For Sale and Wanted
- Topic: ISO chevy Items NP205/ Dana 60/ 4l80E
- Replies: 7
- Views: 2212
Re: ISO chevy Items NP205/ Dana 60/ 4l80E
I think I am missing a nut for a drive flange on one and only have one shifter. I also have a large bearing ford 31 spline input I could let go for the right price with one. Been in dry storage.
- Tue May 23, 2017 1:33 pm
- Forum: For Sale and Wanted
- Topic: ISO chevy Items NP205/ Dana 60/ 4l80E
- Replies: 7
- Views: 2212
Re: ISO chevy Items NP205/ Dana 60/ 4l80E
I have a pair of figure 8 205s I would sell cheap
- Fri May 05, 2017 8:18 pm
- Forum: General BS Area
- Topic: Looking for a general machinist
- Replies: 3
- Views: 1449
Re: Looking for a general machinist
They said their insurance won't let them touch automotive jobs
- Thu May 04, 2017 9:11 am
- Forum: General BS Area
- Topic: Looking for a general machinist
- Replies: 3
- Views: 1449
Looking for a general machinist
I need some work done for a motorcycle project. Saw the name Greg Brott online but not sure the number is good anymore or if he is active...someone with a bit of inventor in them would be great too.
- Tue Mar 07, 2017 1:14 pm
- Forum: Recent Run Reports - Peak Putter Club Runs
- Topic: Cowiche Mill rd snow run March 4th.
- Replies: 5
- Views: 7681
Re: Cowiche Mill rd snow run March 4th.
SPR wrote:Was it clumpy suger snow with no bottom?
The bottom half was like that. areas had a thick center/top crust. if you broke through getting on top was pretty tough to do.