PEAK PUTTERS

Anybody know where to get the outer snap-ring for a Dana 60.
Not the small one on the shaft but the larger one that fits inside the hub groove.

Thank you.

James

tenikiwon wrote:...Found out that with the current leafs there is too much drop...

That isn't something you hear everyday.

Check with Ron at 4WheelingPlus.com
He is suppose to be able to meet/beat all major outlets and he is sort of local.

Well new surprise today. Bought the Jeep with a SB chevy (350?) and an unknown 4sp. Seeing that It's a SB I was assumed it was a 420 or 465, well it's a NP435. After a little research the 435 did come in Chevy for about 4yrs (68-72). Does anyone know how to tell the difference between a Ford and Che...

Those are very nice corners, nice job putting them on. Only problem I see is they may not help in you quest to keep the HT. If the Jeep tips (tree wells come to mind) the top edge (where the HT fits) is usually the first place to hit. A set of "mini" nerf bars (not sure what to call them),...

Ceg wrote:Only if I don't have gas money. Naches Pass this weekend.

Is this just a club run? I've been watching and not seeing many runs announced on the EWOR site.

Suppose a Suburban will fit?

Just the angle of the camera, the grill is lined up.

As for bending, Bend-Tech is my friend.

After thinking I had success yesterday, I put the hood down, wrong thing to do it was off by about 1.5 inches. I didn't think my measurements were that bad and they weren't. I've decided something isn't straight, imagine that on a Jeep, and that is the way it's going to be. http://mysite.verizon.net...

More updates: http://mysite.verizon.net/res6wdko/sitebuildercontent/sitebuilderpictures/65_cj-5_012.jpg http://mysite.verizon.net/res6wdko/sitebuildercontent/sitebuilderpictures/65_cj-5_013.jpg http://mysite.verizon.net/res6wdko/sitebuildercontent/sitebuilderpictures/65_cj-5_014.jpg I'm seeing lots ...

This has potetial also never been a huge yota fan but the seem to wheel pretty good. http://kpr.craigslist.org/car/747602780.html Is that the one Ed Livzey (sp?) built? If it is, it is worth every penny. Yup, that is his old truck. Unless someone changed them, they are tru-tracks (gear driven limit...

Streetable (highway up, wheel, drive home) fuel injected multi speed Xfer (expensive option) overdrive 35"-37" tires Selectable lockers Under 74" wide, this fits under forest service use permits (TTCW, Trail Jam, etc...) For ease, YJ/TJ have just about every bolt on or specific kit ma...

Probably should use a little more discretion with a camera around.
And she is from Yakima

http://www.postchronicle.com/news/original/article_212157118.shtml

Knew I should have given Ed a call but looks like he found a rider.

Some updated pictures, nothing is completely square yet: http://mysite.verizon.net/res6wdko/sitebuildercontent/sitebuilderpictures/65_cj-5_008.jpg http://mysite.verizon.net/res6wdko/sitebuildercontent/sitebuilderpictures/65_cj-5_009.jpg http://mysite.verizon.net/res6wdko/sitebuildercontent/sitebuild...

Won't be cheap but you'll get quality bolts:

M&M bolt, Oregon st and A street, Pasco

Fasteners, Oregon st, Pasco, next to ranch & home (thinking that is right)

Fastenals, might have something but they don't seem to be as nice about breaking boxes up.

he still has a Bronco, not sure if it's the same one or not.

Let me know when you want to look, I'll be around but in and out.

Stolen from another thread but: ...This plus a waggy front with Ford bearing hubs would be sweet in a CJ/YJ/TJ/ etc.J with 35s. UPDATED 2-23-09 Thought this was the hot ticket too but changed my mind and happen to have this setup sitting around: '75 Waggy front D44, pass side drop, complete hub to h...

Red: under door bars and some rear gussets are going to be put in These I'm trying to come up with one or a combination: cyan: This was my orginal idea, gives side to side support Purple: Gives side to side but I don't think as much as the cyan, also gives a place for a frame mount and harnesses EDI...

OK, it's been a while since I updated the progress, mainly because it's not getting done by itself. BUT this has been corrected in the last couple of days. If I'm lucky I'll actually get some money out of the suburban and spend most of the weekend finishing the cage. I'm a big believer in the Bend-t...

72-75 CJ windshield frame, maybe earlier.
Must have the windshield wiper motor mounted on driver side, outside bottom.

We didn't hardly see anyone and were breaking trail all weekend long, this makes for a nice weekend. Drove up Saturday morning to Marcella's and only found about 1/2 the amount of people camped there. After trying to figure out what to do, we headed up the Mud Springs trail, back side of Clover Spri...

How about pulling the adapter off the FSJ trans and putting on the Ford trans?
I know the CJ came with the 4:1 instead of 6:1 first gear, don't know about the FSJs. Same thing with Scouts, find a cheap T18 and just pull the adapter if needed.

Need a set of swing pedals, both brake and clutch, from a CJ or YJ.

Been a while since anything has happened. GF has a kid that won't do his home work, so I've been spending LOT O TIME trying to get him caught up and this has been very bad on shop time. Some of the last shots show the bumper and rear mounts welded up. Well ran into a little problem, the center line ...