PEAK PUTTERS

i finished the skin on the roof and one side of the trailer and got most of the trim done on the same side

I hope to be working on the other side next weekend, and finish the galley this weekend

I bought (1) 5' by 10' sheet of aluminum, and 1 sheet of 4'x10' aluminum to complete the roof the grain will be sideways on the rear, but i don't think you will be able too see it, the rear will match the sides. i will need 2 more 4'x10" sheets to finish the sides

started skinning the roof today, might finish it tomorrow if I get off of work early http://i205.photobucket.com/albums/bb317/colemancooler/936746_651422394874641_735783666_n_zps5a235cf8.jpg http://i205.photobucket.com/albums/bb317/colemancooler/936220_651422481541299_1400725218_n_zps8f27d274.jpg

John Deere is a tread lightly sponsor, not every one is against us http://treadlightly.org/tread-lightly-announces-john-deere-as-newest-sponsor-of-restoration-for-recreation/?utm_source=Emailbrain&utm_medium=email&utm_term=NewsletterLink&utm_campaign=Press+Release%3A+Uwharrie+Press+Relea...

probably some hard to get to camping spots, or the dunes, but i don't plan on dragging it down any tight northwest trails.

with the changing weather I have been working on my kitchen on the trailer. i finished the stainless counter top, and am thinking about using license plates to finish the side walls on the inside of the kitchen, and finish the rest of the trim in galvanized, http://i205.photobucket.com/albums/bb317/...

looks good

http://i205.photobucket.com/albums/bb317/colemancooler/IMG_0026.jpg http://i205.photobucket.com/albums/bb317/colemancooler/decemberupdate3.jpg interior shot, I am not a carpenter http://i205.photobucket.com/albums/bb317/colemancooler/decemberupdate5.jpg more interior http://i205.photobucket.com/alb...

that has slowed me down a little as well

I was waiting for nice weather to take Pics, but I have been lazy and Broke, I mounted the led tail lights under the frame and built flat bar guards to protect them, also had to re wire the tail lights because the used length of 7 wire I had had a short in it. the outside is skinned with 1/4 ply I j...

some where on pirate 4x4 there is a write up on a xj truss job where the guy totally plated the unibody

[youtube]http://www.youtube.com/watch?v=-K6JR9_LkY8[/youtube] 4bt mud racer [youtube]http://www.youtube.com/watch?v=BxxDxnlwsps&feature=youtu.be[/youtube] xj with 4bt [youtube]http://www.youtube.com/watch?v=RypBr174ibo&feature=youtu.be[/youtube] there are a couple more xj videos with the 4bt...

Nice truck

http://seattletimes.nwsource.com/html/localpages/2018917043_tracking-wildfire-progression.html
current map

http://www.radioreference.com/apps/audio/?action=cwp&ctid=2976

kittitas county scanner live

calling for the recovery crew at werock last weekend

your toy looks good in safety yellow

A great club, I always have fun when I run with them !

Nice work

looks good!

still slowly making progress, i am getting the walls insulated, and wood paneling on the walls inside, also got the door mocked up, and received my Led rope lights that I ordered on ebay For $9 http://imgs.inkfrog.com/pix/pitalam/warm_wp_3528.jpg http://i205.photobucket.com/albums/bb317/colemancoole...

from what I have read it is not worth the extra effort to constantly move the solar panel to keep it facing the sun, It would suck to break it Okay, here's where you have to make some decisions that will affect how much solar panel you buy. You can expect to gain about 20% extra charging capacity if...

Each year outdoor recreation spending equals $255.6 billion in the American West, employing 2.3 million Americans and generating $15.4 billion in federal tax receipts and $15.3 billion in state and local tax receipts. http://www.outdoorindustry.org/national-economic-impact-reports.php?action=detail&...

use masking tape to cover the cutting area, if you care about the paint

got a 60 watt solar set up for fathers day

http://www.zampsolar.com/index.php?m=87&s=542&c=&id=1306

I am very excited to get this mounted, but still have to get the skin on first