WANTED:15x8 Chevy or Toyota 6lug Steel wheels

Classifieds section.

Moderator: TJDave

Post Reply
rennat_2006
Posts: 124
Joined: Thu Feb 17, 2011 8:44 pm
Location: Pasco

WANTED:15x8 Chevy or Toyota 6lug Steel wheels

Postby rennat_2006 » Thu Jan 26, 2012 9:29 pm

Wanna make me some beadlocks and would rather start with a 15x8 than a 15x10. Ive got some 15x10's if someone was interested in trading.
2000 Zr2 Blazer with HP Dana 44. 4.88's, 36's, Beadlocks, Welded rear, SYE, CV driveshafts...
Top
Wrench
Posts: 1239
Joined: Sat May 30, 2009 7:23 am
Location: in a van down by the river

Postby Wrench » Fri Jan 27, 2012 6:24 am

I am guessing they dont need to be purty?

I have a set of older Chevy Rally wheels that have a bit of surface rust. Call me at 947 75O4 if you are interested.
Paul
'84 XJ, '19JL
Top
rennat_2006
Posts: 124
Joined: Thu Feb 17, 2011 8:44 pm
Location: Pasco

Postby rennat_2006 » Fri Jan 27, 2012 8:58 am

Nope dont have to be pretty since they are gonna be cut and welded on for the beadlocks.

How much would you like for them?
2000 Zr2 Blazer with HP Dana 44. 4.88's, 36's, Beadlocks, Welded rear, SYE, CV driveshafts...
Top
Wrench
Posts: 1239
Joined: Sat May 30, 2009 7:23 am
Location: in a van down by the river

Postby Wrench » Fri Jan 27, 2012 8:18 pm

rennat_2006 wrote:Nope dont have to be pretty since they are gonna be cut and welded on for the beadlocks.

How much would you like for them?


How about you just donate to my "worthy cause donation jar" and we call it good? I'll be around tomorrow if you want to pick them up.
Paul
'84 XJ, '19JL
Top
rennat_2006
Posts: 124
Joined: Thu Feb 17, 2011 8:44 pm
Location: Pasco

Postby rennat_2006 » Fri Jan 27, 2012 9:58 pm

Sounds good. I will try and get ahold of ya tomorrow.
2000 Zr2 Blazer with HP Dana 44. 4.88's, 36's, Beadlocks, Welded rear, SYE, CV driveshafts...
Top
rennat_2006
Posts: 124
Joined: Thu Feb 17, 2011 8:44 pm
Location: Pasco

Postby rennat_2006 » Sat Jan 28, 2012 4:40 pm

Got hung up today messing with leaf springs trying to make a good pack. Tried to put the 38.5s on that I wanted the wheels for but there's just no way to make them fit with the rear fender flares only being 34 inches apart.

Going to be selling the 38.5's and replacing them with a set of 36ks or 35's so gonna hold off on wheels until I know for sure new tires are also 15's. If they are I'm definetely interested in them.
2000 Zr2 Blazer with HP Dana 44. 4.88's, 36's, Beadlocks, Welded rear, SYE, CV driveshafts...
Top
rennat_2006
Posts: 124
Joined: Thu Feb 17, 2011 8:44 pm
Location: Pasco

Postby rennat_2006 » Fri Feb 03, 2012 11:16 pm

Going to get ahold of ya tomorrow, would love to pick them up I found the right set of tires. Will call ya tomorrow!
2000 Zr2 Blazer with HP Dana 44. 4.88's, 36's, Beadlocks, Welded rear, SYE, CV driveshafts...
Top
Wrench
Posts: 1239
Joined: Sat May 30, 2009 7:23 am
Location: in a van down by the river

Postby Wrench » Sat Feb 04, 2012 8:13 am

I will be out wheeling for most the day, but should still have cell service. Just let me know!
Paul
'84 XJ, '19JL
Top
Toolegit86
Posts: 421
Joined: Wed Sep 17, 2008 8:56 am

Postby Toolegit86 » Sun Feb 05, 2012 2:10 pm

I have some already made beadlocks in good shape.. all hardwear is good. Even has a set of worn 39.5 irocks
Camaro turbo lsx th400
06 Cummins "racetruck"
tj 1ton 40's 5.3 build

509 Crawlers on the facebook
Top
rennat_2006
Posts: 124
Joined: Thu Feb 17, 2011 8:44 pm
Location: Pasco

Postby rennat_2006 » Sun Feb 05, 2012 2:17 pm

How much?
2000 Zr2 Blazer with HP Dana 44. 4.88's, 36's, Beadlocks, Welded rear, SYE, CV driveshafts...
Top
Toolegit86
Posts: 421
Joined: Wed Sep 17, 2008 8:56 am

Postby Toolegit86 » Sun Feb 05, 2012 3:46 pm

make me a offer i want something diffrent.
Camaro turbo lsx th400
06 Cummins "racetruck"
tj 1ton 40's 5.3 build

509 Crawlers on the facebook
Top
rennat_2006
Posts: 124
Joined: Thu Feb 17, 2011 8:44 pm
Location: Pasco

Postby rennat_2006 » Sun Feb 05, 2012 5:00 pm

Id give you $200 for them seeing how the kit is $200 and my labor to weld them on is free. $200 in crisp 20's if your interested. Tires aren't worth anything to me

Or id give you a set of 15x10 mickey thompson classic2's 6 lug with set of damn near bald trxus m/ts(35's)
2000 Zr2 Blazer with HP Dana 44. 4.88's, 36's, Beadlocks, Welded rear, SYE, CV driveshafts...
Top
rennat_2006
Posts: 124
Joined: Thu Feb 17, 2011 8:44 pm
Location: Pasco

Postby rennat_2006 » Sun Feb 05, 2012 5:28 pm

You can call or text me if your interested 947-6728
2000 Zr2 Blazer with HP Dana 44. 4.88's, 36's, Beadlocks, Welded rear, SYE, CV driveshafts...
Top
Toolegit86
Posts: 421
Joined: Wed Sep 17, 2008 8:56 am

Postby Toolegit86 » Sun Feb 05, 2012 5:41 pm

you got any pics of the wheels and tires u got i would be intrested in those
and just to let u know the bobbie long locks are cheap its the hardwear they screw u on.. all grade 8 with with teflon locks
Camaro turbo lsx th400
06 Cummins "racetruck"
tj 1ton 40's 5.3 build

509 Crawlers on the facebook
Top
Post Reply

Return to “For Sale and Wanted”

Who is online

Users browsing this forum: No registered users and 1 guest