Page 1 of 2
07-11 JK D-30 upgrade
Posted: Tue Dec 24, 2013 10:45 pm
by scumby
http://spyntec.com/jeep_wrangler_jk_spyntec_overview/ (used)
also have the inner alloy axle shafts. non ruby (used). wait there's more. rear alloys as well (new)
Posted: Thu Dec 26, 2013 8:00 pm
by Toolegit86
price..
Posted: Thu Dec 26, 2013 8:52 pm
by scumby
with or without the black 15 x 10 black steelies? 5 x 5.5
Posted: Fri Dec 27, 2013 10:11 am
by Danny
Al, back spacing?
Posted: Fri Dec 27, 2013 11:37 am
by Chrispy
How much for just the wheels
Posted: Fri Dec 27, 2013 12:51 pm
by Yrjan
Toolegit86 wrote:price..
Yea, what he said... How much???
Posted: Fri Dec 27, 2013 10:00 pm
by scumby
best I can figure assuming I did it correctly, 3 3/4
Better pics of rear shafts, new never installed but a little surface rust on the splines.
Bringing back these black heated leather seats out of a 318i that I over payed for incase anyone is interested in them for SOLD
Posted: Fri Dec 27, 2013 10:13 pm
by scumby
So I hate to lose money on things but to break even on the entire kit including wheels I would need $850. It's a good price if you add all the pieces up!
Also remember I won't be back in town until february and these parts won't be for at least a month after that.
with all that said is anyone still interested?
Posted: Fri Dec 27, 2013 10:22 pm
by OldGreen
scumby wrote:So I hate to lose money on things but to break even on the entire kit including wheels I would need $850. It's a good price if you add all the pieces up!
Also remember I won't be back in town until february and these parts won't be for at least a month after that.
with all that said is anyone still interested?
Tell me about the seats. . . .
Posted: Fri Dec 27, 2013 10:24 pm
by Danny
So, you want to sell the axels/wheels, everything as a set? And the wheels are 10" inside to inside, right?
Posted: Fri Dec 27, 2013 10:56 pm
by scumby
OldGreen wrote:scumby wrote:So I hate to lose money on things but to break even on the entire kit including wheels I would need $850. It's a good price if you add all the pieces up!
Also remember I won't be back in town until february and these parts won't be for at least a month after that.
with all that said is anyone still interested?
Tell me about the seats. . . .
i have the head rests as well but looks like the brackets on the bottom are to wide, much adaption needed.
Posted: Fri Dec 27, 2013 10:59 pm
by scumby
Danny wrote:So, you want to sell the axels/wheels, everything as a set? And the wheels are 10" inside to inside, right?
inside to inside 10" outer lip to outer lip 11"
Posted: Sat Dec 28, 2013 3:12 pm
by Danny
Thanks Al. I tore up a wheel and tire on the Rubicon trail in July and am looking for a couple of wheels, but upon closer inspection they are 8". Sorry
Posted: Sat Dec 28, 2013 4:45 pm
by tobyw
Danny wrote:but upon closer inspection
They also aren't your bolt pattern, Danielson
Posted: Sat Dec 28, 2013 9:01 pm
by Toolegit86
so what is the bolt pattern on the adapters.. i would love to do this to my front end.. and i would be intrested in it all but the wheels..
Posted: Sat Dec 28, 2013 10:05 pm
by Wrench
Note: Uses 5 on 5.5 bolt pattern, rotors must be bored.
Posted: Sat Dec 28, 2013 10:30 pm
by scumby
Wrench wrote:Note: Uses 5 on 5.5 bolt pattern, rotors must be bored.
front includes rotors, whatever you have in the back has to be bored.
Posted: Sat Dec 28, 2013 11:28 pm
by scumby
if someone weren't ready to do the back yet this is an option. adaption
http://www.ebay.com/itm/2-WHEEL-SPACERS ... 128wt_1125
Posted: Sat Dec 28, 2013 11:48 pm
by iaccocca
[Why does Scumby have JK parts?]
Posted: Sun Dec 29, 2013 1:27 am
by scumby
iaccocca wrote:[Why does Scumby have JK parts?]
because i saw an opportunity for someone to make an upgrade at a decent price.
Posted: Sun Dec 29, 2013 1:53 pm
by Danny
tobyw wrote:Danny wrote:but upon closer inspection
They also aren't your bolt pattern, Danielson
Didn't even think of that Toooooby.
Posted: Mon Dec 30, 2013 9:16 pm
by scumby
too much?
Posted: Fri Jan 24, 2014 10:38 pm
by scumby
Wheels gone, $700 fir the kit.
Posted: Wed Feb 05, 2014 6:37 pm
by Toolegit86
you still got this set up??
Posted: Wed Feb 05, 2014 8:58 pm
by scumby
Technically yes, it is packed and on it's way to richland. Interested?