Misc Cherokee Parts Needed

Classifieds section.

Moderator: TJDave

Post Reply
User avatar
mattawajeep
Posts: 1221
Joined: Wed May 19, 2010 6:18 pm
Location: Mattawa, WA

Misc Cherokee Parts Needed

Postby mattawajeep » Sun Mar 23, 2014 10:39 am

So, I'm going to be running into town early next week to hunt for the last few parts I need to put an AW4 an NP242 in my Grand Cherokee.

I'm hoping American or Pasco Auto wrecking will have what I need but I figured asking here might not hurt.

Here's my shopping list:
    Cherokee TCM and Trans Harness Plugs - From a 92-96 Cherokee

    Cherokee Dust Shields / Engine bell housing spacer thingy - from any AW4 Jeep

    Cherokee Shifter Bezel - I think any year Cherokee with AW4 will work

    AW4 Dipstick and Tube - Any AW4 jeep

    Cooler line stuff - I think OEM Cherokee lines will work, my trans has the fittings

    Torque Convertor Bolts - Any AW4 Jeep

    Bellhousing Bolts
Top
OldGreen
Posts: 4506
Joined: Tue Mar 13, 2007 6:21 am
Location: coming or going?

Postby OldGreen » Sun Mar 23, 2014 12:01 pm

If I can get the old tranny out today, I'll have the dipstick tube for you. I'll let you know. I may have the plug too. You got a pic of that?
Top
User avatar
mattawajeep
Posts: 1221
Joined: Wed May 19, 2010 6:18 pm
Location: Mattawa, WA

Postby mattawajeep » Sun Mar 23, 2014 12:25 pm

OldGreen wrote:If I can get the old tranny out today, I'll have the dipstick tube for you. I'll let you know. I may have the plug too. You got a pic of that?


You pulling the AW4 out of the 2 door? What are you replacing it with?

Here's what the plugs look like on the transmission side, there are two of them:

Image

Image

And here's what the computer side looks like:

Image

The transmission side plugs aren't a big deal, as I can just make something work with weather pack connectors, though it would be easier with them.
Top
User avatar
mattawajeep
Posts: 1221
Joined: Wed May 19, 2010 6:18 pm
Location: Mattawa, WA

Postby mattawajeep » Mon Mar 24, 2014 6:29 pm

Hey Jim you get the transmission out? I'm gonna be in town sometime tomorrow, will you be around?
Top
User avatar
mattawajeep
Posts: 1221
Joined: Wed May 19, 2010 6:18 pm
Location: Mattawa, WA

Postby mattawajeep » Tue Mar 25, 2014 7:57 pm

Well, I was able to collect most of what I need, as well as a few extra things that weren't on my list.

However, I still need:

Dust Shields
TCU Plug


I think I can get the dust shields from pasco auto wrecking, it could just take a while. They have quite a few of them still in the vehicles, but won't be taking them apart anytime soon. Might try the dealership tomorrow and see if they have repair plugs for sale.
Top
User avatar
commando14
Peak Putters Member
Peak Putters Member
Posts: 1224
Joined: Sun Mar 11, 2007 3:37 pm
Location: Kennewick, WA

Postby commando14 » Tue Mar 25, 2014 8:06 pm

You just need the plug that plugs into the TCU? I might have one.. will check tomorrow.
Top
User avatar
mattawajeep
Posts: 1221
Joined: Wed May 19, 2010 6:18 pm
Location: Mattawa, WA

Postby mattawajeep » Tue Mar 25, 2014 8:14 pm

commando14 wrote:You just need the plug that plugs into the TCU? I might have one.. will check tomorrow.


Yup, the plug that goes into the TCU. I'm not really clear on exactly which years will work, probably 92-96 though earlier versions might also work. If you have one that'd be awesome.
Top
User avatar
mattawajeep
Posts: 1221
Joined: Wed May 19, 2010 6:18 pm
Location: Mattawa, WA

Postby mattawajeep » Wed Mar 26, 2014 4:48 pm

Went back to pasco auto wrecking this evening and was able to find everything I needed. The swap should be all set to go.
Top
Post Reply

Return to “For Sale and Wanted”

Who is online

Users browsing this forum: No registered users and 2 guests