NP231 or NP241
Moderator: TJDave
NP231 or NP241
Looking for a donor for building a crawl box. I just need the planetary and related components (front case can be cracked but ring gear must be intact)
- commando14
- Peak Putters Member
- Posts: 1211
- Joined: Sun Mar 11, 2007 3:37 pm
- Location: Kennewick, WA
Re: NP231 or NP241
I have a 231 with a cracked case you can have if you want it
Re: NP231 or NP241
Planning on doing a SYE and possibly and upgrade of the planetary gears to 4:1 in a few weeks. You can have any of the old stock stuff out of the case when I swap out all the innards. My case is a NP231 out of an 04 TJ. I don't really know if any of this stuff will help in your application though.
2004 TJ Wrangler X (Rubiclone)
2.5" OME Lift, 1.25 in Body Lift, Flat Fender Flares
35x12.50x15 Maxxis Razor MTs
D30 ARB 4.56s Rear JKD44 w/ 8.8 disk brakes Ford 9" goodies, 4.56 and ARB.
2.5" OME Lift, 1.25 in Body Lift, Flat Fender Flares
35x12.50x15 Maxxis Razor MTs
D30 ARB 4.56s Rear JKD44 w/ 8.8 disk brakes Ford 9" goodies, 4.56 and ARB.
- commando14
- Peak Putters Member
- Posts: 1211
- Joined: Sun Mar 11, 2007 3:37 pm
- Location: Kennewick, WA
Re: NP231 or NP241
Scratch that... I checked and it's actually a 242, not sure if that will work for what you need.
Re: NP231 or NP241
commando14 wrote:Scratch that... I checked and it's actually a 242, not sure if that will work for what you need.
Let me check with the vendor but I think it might work as a partial donor (I think I need a shift collar from a 231 still)
Re: NP231 or NP241
Looks like the 242 will work for me
Re: NP231 or NP241
I need to see how the planetary cleans up....was alot of trash in there (fine AL powder from the tossed chain) it spins but not very nicely. hoping it frees up a little better with some cleaning.
Well back to my Toyota....more parts showing up today!
Well back to my Toyota....more parts showing up today!
Return to “For Sale and Wanted”
Who is online
Users browsing this forum: No registered users and 7 guests