Page 1 of 1
NP231 or NP241
Posted: Thu Apr 07, 2016 8:02 pm
by Fab_man
Looking for a donor for building a crawl box. I just need the planetary and related components (front case can be cracked but ring gear must be intact)
Re: NP231 or NP241
Posted: Fri Apr 08, 2016 1:08 pm
by commando14
I have a 231 with a cracked case you can have if you want it
Re: NP231 or NP241
Posted: Fri Apr 08, 2016 1:10 pm
by Lud
Planning on doing a SYE and possibly and upgrade of the planetary gears to 4:1 in a few weeks. You can have any of the old stock stuff out of the case when I swap out all the innards. My case is a NP231 out of an 04 TJ. I don't really know if any of this stuff will help in your application though.
Re: NP231 or NP241
Posted: Fri Apr 08, 2016 1:27 pm
by commando14
Scratch that... I checked and it's actually a 242, not sure if that will work for what you need.
Re: NP231 or NP241
Posted: Fri Apr 08, 2016 7:41 pm
by Fab_man
commando14 wrote:Scratch that... I checked and it's actually a 242, not sure if that will work for what you need.
Let me check with the vendor but I think it might work as a partial donor (I think I need a shift collar from a 231 still)
Re: NP231 or NP241
Posted: Wed Apr 27, 2016 7:09 am
by Fab_man
Looks like the 242 will work for me
Re: NP231 or NP241
Posted: Thu Apr 28, 2016 7:57 am
by OldGreen
I have a 242 you can have.
Re: NP231 or NP241
Posted: Thu Apr 28, 2016 5:15 pm
by Fab_man
Thanks for the case!!
Re: NP231 or NP241
Posted: Fri Apr 29, 2016 6:32 am
by OldGreen
No problem. Hope it works out.
Re: NP231 or NP241
Posted: Fri Apr 29, 2016 10:06 am
by Fab_man
I need to see how the planetary cleans up....was alot of trash in there (fine AL powder from the tossed chain) it spins but not very nicely. hoping it frees up a little better with some cleaning.
Well back to my Toyota....more parts showing up today!