Anybody have a TJ skid plate/crossmember they want to part with cheap?
Not sure if there's a difference, but it's for a '99/4.0/AX-15
Wanted: TJ rear adjustable control arms
Moderator: TJDave
Re: Wanted: Early TJ stock crossmember
Pretty sure the difference between early 97-02 and late 03-06 is the 6 frame holes are in a slightly different place, and the later skids hang just a bit lower to accommodate the pig 42rle autos that replaced the 32rh in 03.
I 'd give you mine, but tossed it in the scrap heap years ago.
I 'd give you mine, but tossed it in the scrap heap years ago.
2018 JLU Rubicon
Tow bar mount
Trailer hitch
Tow bar mount
Trailer hitch
-
- Posts: 421
- Joined: Wed Sep 17, 2008 8:56 am
Re: Wanted: Early TJ stock crossmember
I have one off my 97 I don't think it works with my next set up
Camaro turbo lsx th400
06 Cummins "racetruck"
tj 1ton 40's 5.3 build
509 Crawlers on the facebook
06 Cummins "racetruck"
tj 1ton 40's 5.3 build
509 Crawlers on the facebook
Re: Wanted: Early TJ stock crossmember
I have an 04 TJ and am hoping to get rid of my stock cross member this month. I know it's not exactly what you're looking for but you can have it free.
2004 TJ Wrangler X (Rubiclone)
2.5" OME Lift, 1.25 in Body Lift, Flat Fender Flares
35x12.50x15 Maxxis Razor MTs
D30 ARB 4.56s Rear JKD44 w/ 8.8 disk brakes Ford 9" goodies, 4.56 and ARB.
2.5" OME Lift, 1.25 in Body Lift, Flat Fender Flares
35x12.50x15 Maxxis Razor MTs
D30 ARB 4.56s Rear JKD44 w/ 8.8 disk brakes Ford 9" goodies, 4.56 and ARB.
Re: Wanted: Early TJ stock crossmember AND REAR AXLE PARTS
Ok, now more parts are needed... BOO!
'99 TJ D35 3.07 with WASTED spider gears, glitter lotion for gear oil!
Who has what for cheap. Don't want to polish the turd, but he's gotta wheel!
'99 TJ D35 3.07 with WASTED spider gears, glitter lotion for gear oil!
Who has what for cheap. Don't want to polish the turd, but he's gotta wheel!
Re: Wanted: Early TJ stock crossmember AND REAR AXLE PARTS
Ok, axle parts are being overnighted and skid plate is getting picked up tonight, thanks Toolegit86
-
- Peak Putters Member
- Posts: 1237
- Joined: Sat May 30, 2009 7:23 am
- Location: in a van down by the river
Re: Wanted: Early TJ stock crossmember AND REAR AXLE PARTS
You have a D35 Trac-Lok sitting in your garage. Why not just put that in?
Paul
'84 XJ, '19JL
'84 XJ, '19JL
Re: Wanted: Early TJ stock crossmember AND REAR AXLE PARTS
Wrench wrote:You have a D35 Trac-Lok sitting in your garage. Why not just put that in?
Now you join in... wasn't gonna give away your parts!
-
- Peak Putters Member
- Posts: 1237
- Joined: Sat May 30, 2009 7:23 am
- Location: in a van down by the river
Re: Wanted: Early TJ stock crossmember AND REAR AXLE PARTS
Roman wrote:Wrench wrote:You have a D35 Trac-Lok sitting in your garage. Why not just put that in?
Now you join in... wasn't gonna give away your parts!
Sorry, got a lot on my plate right now. I'll never get around to selling it, so let it freely go where there is a need.
Paul
'84 XJ, '19JL
'84 XJ, '19JL
Re: Wanted: TJ rear adjustable control arms
Ok, NOW it's adjustable control arms...
Talked with TJD, but those need rebuilt, don't have enough time before Liberty...
Talked with TJD, but those need rebuilt, don't have enough time before Liberty...
Re: Wanted: TJ rear adjustable control arms
may want to list the entire suspension in the wanted section so you are covered. otherwise you'll have to keep updating it. just sayin'.
Lightly Lifted and Locked LJ
I'm Scumby Dammit, take it or leave it!
I'm Scumby Dammit, take it or leave it!
Re: Wanted: TJ rear adjustable control arms
After a full set of arms the "suspension" will be pretty much replaced... he's done springs and shocks already.
Return to “For Sale and Wanted”
Who is online
Users browsing this forum: No registered users and 1 guest