Anyone have an extra transfer case?

Classifieds section.

Moderator: TJDave

User avatar
JambaJeep
Posts: 108
Joined: Wed Feb 27, 2008 4:11 pm
Location: KENNEWICK

Anyone have an extra transfer case?

Postby JambaJeep » Tue Jul 10, 2018 8:46 am

Does anyone have an NP231 they would part with?
I have a standard SYE installed and after stuffing the 8.8 in the back my angles are less than ideal and I'm chewing through driveshafts like crazy.

I'm doing a mega-short sye, 1" MML, ordering a better driveshaft and lowering the jeep 1" possibly

klinger
Posts: 152
Joined: Wed Jan 13, 2010 9:47 pm
Location: Burbank

Re: Anyone have an extra transfer case?

Postby klinger » Wed Jul 11, 2018 9:30 pm

I had the same issue on my tj 8.8 swap, i ended up cutting the upper control arms and lengthening them to change the angle. Worked great and way cheaper. When i could afford several years later I went with fully adjustable control arms and pushed everything back by 2 inches. Tj dave has a great write up on the wrangler forum for re locating the rear spring pockets to make it even better.

User avatar
JambaJeep
Posts: 108
Joined: Wed Feb 27, 2008 4:11 pm
Location: KENNEWICK

Re: Anyone have an extra transfer case?

Postby JambaJeep » Fri Jul 13, 2018 9:26 am

Yeah I have nice fully adjustable control arms all around, clearanced the gas tank and skid a little and pushed everything back as far as I could, track bar rubs a little but nothing to worry about.

Between the axle diameter increase and the truss dimensions it lifted everything about another inch. Pinion angle is sitting at about 15°. Most of the problem is from havitoo much droop, but I really don't want to go the limiting strap route

klinger
Posts: 152
Joined: Wed Jan 13, 2010 9:47 pm
Location: Burbank

Re: Anyone have an extra transfer case?

Postby klinger » Fri Jul 13, 2018 4:22 pm

I see why going for extra short sye kit. Which np231 are you looking for. Manual or automatic?

klinger
Posts: 152
Joined: Wed Jan 13, 2010 9:47 pm
Location: Burbank

Re: Anyone have an extra transfer case?

Postby klinger » Sat Jul 14, 2018 12:18 pm

I should have been more specific, are you looking for a np231 from a manual transmission or automatic due to spline length. I've got some friends at work who might have some extra parts.

User avatar
JambaJeep
Posts: 108
Joined: Wed Feb 27, 2008 4:11 pm
Location: KENNEWICK

Re: Anyone have an extra transfer case?

Postby JambaJeep » Thu Jul 19, 2018 9:57 pm

Manual thank you

User avatar
bobracing
Posts: 750
Joined: Fri Jun 15, 2007 10:20 am

Re: Anyone have an extra transfer case?

Postby bobracing » Fri Jul 20, 2018 11:10 am

If you can't find a manual, the input gear is an easy swap if you find an auto.
James
'92 YJ with a little something of everything.


Return to “For Sale and Wanted”

Who is online

Users browsing this forum: No registered users and 12 guests