Picked up a TJ to tinker with due to COVID boredom... Looking for TJ parts, not really sure what, but interested in what anyone might have laying around that they don't want anymore.
One thing I do want for certain is a set of doors. Fabric, half, full, don't really care just some doors...
What else??
WTB: TJ Parts
Moderator: TJDave
WTB: TJ Parts
Yep, I've wheeled one of those, too...
Re: WTB: TJ Parts
You are welcome to any of my stock stuff I have laying around: Tie rod, control arms, tail lights, rear slip yoke drive shaft, etc.
2018 JLU Rubicon
Tow bar mount
Trailer hitch
Tow bar mount
Trailer hitch
Re: WTB: TJ Parts
Awesome, thanks Dave!! What all control arms have you got? I just pulled the front axle last night and found the bushings to be in about as bad of condition as I've ever seen on what appears to have been a primarily street-driven rig I'm going to ASSume the rears are in a similar state of disrepair...
Yep, I've wheeled one of those, too...
Re: WTB: TJ Parts
tobyw wrote:Awesome, thanks Dave!! What all control arms have you got? I just pulled the front axle last night and found the bushings to be in about as bad of condition as I've ever seen on what appears to have been a primarily street-driven rig I'm going to ASSume the rears are in a similar state of disrepair...
I have all the stock arms, minus 2 that Jimmy used for his LJ. Good bushings with less than 20k miles when I took them off. I also have some adjustable arms. 2 upper front RE, and the rest are Rusty's. Some of the Rusty's arms have some horrid rubber ends on one side. I think Trevor might still have a couple of them he borrowed until his new ones came in.
2018 JLU Rubicon
Tow bar mount
Trailer hitch
Tow bar mount
Trailer hitch
Re: WTB: TJ Parts
TJDave wrote:tobyw wrote:Awesome, thanks Dave!! What all control arms have you got? I just pulled the front axle last night and found the bushings to be in about as bad of condition as I've ever seen on what appears to have been a primarily street-driven rig I'm going to ASSume the rears are in a similar state of disrepair...
I have all the stock arms, minus 2 that Jimmy used for his LJ. Good bushings with less than 20k miles when I took them off. I also have some adjustable arms. 2 upper front RE, and the rest are Rusty's. Some of the Rusty's arms have some horrid rubber ends on one side. I think Trevor might still have a couple of them he borrowed until his new ones came in.
are you sure you have RE uppers and Rusty lowers?
Lightly Lifted and Locked LJ
I'm Scumby Dammit, take it or leave it!
I'm Scumby Dammit, take it or leave it!
Re: WTB: TJ Parts
scumby wrote:TJDave wrote:tobyw wrote:Awesome, thanks Dave!! What all control arms have you got? I just pulled the front axle last night and found the bushings to be in about as bad of condition as I've ever seen on what appears to have been a primarily street-driven rig I'm going to ASSume the rears are in a similar state of disrepair...
I have all the stock arms, minus 2 that Jimmy used for his LJ. Good bushings with less than 20k miles when I took them off. I also have some adjustable arms. 2 upper front RE, and the rest are Rusty's. Some of the Rusty's arms have some horrid rubber ends on one side. I think Trevor might still have a couple of them he borrowed until his new ones came in.
are you sure you have RE uppers and Rusty lowers?
Oops! You're right. I gave those away already!
2018 JLU Rubicon
Tow bar mount
Trailer hitch
Tow bar mount
Trailer hitch
Re: WTB: TJ Parts
TJDave wrote:scumby wrote:TJDave wrote:
I have all the stock arms, minus 2 that Jimmy used for his LJ. Good bushings with less than 20k miles when I took them off. I also have some adjustable arms. 2 upper front RE, and the rest are Rusty's. Some of the Rusty's arms have some horrid rubber ends on one side. I think Trevor might still have a couple of them he borrowed until his new ones came in.
are you sure you have RE uppers and Rusty lowers?
Oops! You're right. I gave those away already!
but they haven't been installed on anything yet. and the rustys have new urethane bushings. but if toby needs them i'll pass them along for the price the bushings. i''l try to post pics tomorrow
Lightly Lifted and Locked LJ
I'm Scumby Dammit, take it or leave it!
I'm Scumby Dammit, take it or leave it!
Re: WTB: TJ Parts
Appreciate it fellas, but don't go to any great lengths. After putting a good eye on everything suspension related, pretty much everything but the coils are shot and need replacement. Even the darn sway bar bushings are completely worn out and clunking Probably need to suck it up and just invest in a full suspension system with all new parts to make it right.
Yep, I've wheeled one of those, too...
Re: WTB: TJ Parts
I have factory seat brackets with adapters for aftermarket seats (make me an offer). Also I have a soft top (again, make me an offer). not on the site much so text is preferred. 509-460-8219 - Mike
Re: WTB: TJ Parts
also have tail light guards, LJ stock driveshaft and a NIB track bar.
Lightly Lifted and Locked LJ
I'm Scumby Dammit, take it or leave it!
I'm Scumby Dammit, take it or leave it!
Return to “For Sale and Wanted”
Who is online
Users browsing this forum: AhrefsBot and 77 guests