September Club meeting details.... chili theme potluck and corn hole tourney at the shop of Steve and Dolly. Get your boards and drag them over along with some anti-acid. Kick off at 3pm. See member’s upcoming events for details.

Downsizing from a JKUR to a '97 TJ

Post pics and info of your current projects.
User avatar
Yrjan
Peak Putters Member
Peak Putters Member
Posts: 1000
Joined: Wed Jul 25, 2012 7:41 am
Location: Pasco, WA

Re: Downsizing from a JKUR to a '97 TJ

Postby Yrjan » Mon Jan 29, 2018 7:22 pm

250# down, 250# more to go...
Attachments
24D153D4-EA17-48C1-90FE-1AFC7E958F1F.jpeg
24D153D4-EA17-48C1-90FE-1AFC7E958F1F.jpeg (1.41 MiB) Viewed 5149 times

User avatar
Roman
Peak Putters Member
Peak Putters Member
Posts: 2308
Joined: Wed Mar 14, 2007 5:30 pm
Location: Kennewick, WA

Re: Downsizing from a JKUR to a '97 TJ

Postby Roman » Mon Jan 29, 2018 7:24 pm

Awesome!

User avatar
Yrjan
Peak Putters Member
Peak Putters Member
Posts: 1000
Joined: Wed Jul 25, 2012 7:41 am
Location: Pasco, WA

Re: Downsizing from a JKUR to a '97 TJ

Postby Yrjan » Tue Jan 30, 2018 6:56 pm

And the other half is off. Haha! Jose, you thought this Jeep was high off the ground? You should see it less 500#’s!
Attachments
0213307E-4A67-45D0-8996-0ADBF46EEEB9.jpeg
0213307E-4A67-45D0-8996-0ADBF46EEEB9.jpeg (1.43 MiB) Viewed 5137 times
03B7C4F8-6294-44E4-B17E-7CA12562A44F.jpeg
03B7C4F8-6294-44E4-B17E-7CA12562A44F.jpeg (1.44 MiB) Viewed 5137 times

User avatar
Yrjan
Peak Putters Member
Peak Putters Member
Posts: 1000
Joined: Wed Jul 25, 2012 7:41 am
Location: Pasco, WA

Re: Downsizing from a JKUR to a '97 TJ

Postby Yrjan » Tue Jan 30, 2018 7:04 pm

I know it’s probably no big deal for most of you but it’s exciting to me bacause I’ve never taken apart a vehicle like this before.

User avatar
Yrjan
Peak Putters Member
Peak Putters Member
Posts: 1000
Joined: Wed Jul 25, 2012 7:41 am
Location: Pasco, WA

Re: Downsizing from a JKUR to a '97 TJ

Postby Yrjan » Tue Jan 30, 2018 7:15 pm

Anyone know what these are? Do I need to remove them from the old fenders and reinstall them on the new ones? They weren’t connected to anything?
Attachments
66C1D1DA-1BC9-414F-BA5D-B52E92D9BD74.jpeg
66C1D1DA-1BC9-414F-BA5D-B52E92D9BD74.jpeg (835.55 KiB) Viewed 5137 times
8BC4B8D3-AEA1-421B-9746-B8A2AC08C077.jpeg
8BC4B8D3-AEA1-421B-9746-B8A2AC08C077.jpeg (1009.08 KiB) Viewed 5137 times

User avatar
tobyw
Posts: 1603
Joined: Wed Mar 14, 2007 10:00 am
Location: Under the hood...

Re: Downsizing from a JKUR to a '97 TJ

Postby tobyw » Tue Jan 30, 2018 8:17 pm

Those are for when you disconnect the sway bar, the open end of the link rotates up and slips onto that stub.
Yep, I've wheeled one of those, too...
Image

User avatar
Yrjan
Peak Putters Member
Peak Putters Member
Posts: 1000
Joined: Wed Jul 25, 2012 7:41 am
Location: Pasco, WA

Re: Downsizing from a JKUR to a '97 TJ

Postby Yrjan » Tue Jan 30, 2018 8:44 pm

Oh haha, no sway bar on this thing! Guess I don’t need em.

Lud
Peak Putters Member
Peak Putters Member
Posts: 1017
Joined: Wed Nov 07, 2007 2:50 pm
Location: Pasco, WA

Re: Downsizing from a JKUR to a '97 TJ

Postby Lud » Thu Feb 01, 2018 8:50 pm

Have those on my Jeep. They are part of a rubicon express swaybar disconnect system. There should be a hole at the end where a cotter pin would be used to keep the disconnected swaybar link stowed. Yeah you can ditch those as you stated.
2004 TJ Wrangler X (Rubiclone)
2.5" OME Lift, 1.25 in Body Lift, Flat Fender Flares
35x12.50x15 Goodyear MTR's
D30 ARB 4.56s Rear JKD44 w/ 8.8 disk brakes Ford 9" goodies, 4.56 and ARB.

User avatar
Yrjan
Peak Putters Member
Peak Putters Member
Posts: 1000
Joined: Wed Jul 25, 2012 7:41 am
Location: Pasco, WA

Re: Downsizing from a JKUR to a '97 TJ

Postby Yrjan » Thu Feb 08, 2018 6:30 pm

Tool box
Attachments
89066825-2722-4181-ADF9-4834E4FC6435.jpeg
89066825-2722-4181-ADF9-4834E4FC6435.jpeg (1.18 MiB) Viewed 5082 times
EA7FEE86-9B21-4496-8091-821EC5720CD0.jpeg
EA7FEE86-9B21-4496-8091-821EC5720CD0.jpeg (1.22 MiB) Viewed 5082 times
9A90FE8B-EFB0-44B7-B466-DA5E044875BD.jpeg
9A90FE8B-EFB0-44B7-B466-DA5E044875BD.jpeg (1.34 MiB) Viewed 5082 times

User avatar
TJDave
Peak Putters VP
Peak Putters VP
Posts: 2581
Joined: Sat Jan 12, 2008 11:47 am
Location: East Richland

Re: Downsizing from a JKUR to a '97 TJ

Postby TJDave » Fri Feb 09, 2018 7:02 am

Looks great. If you are still planning to mount your spare on top, my stock carrier is 7" deep. Should account for the wheel offset and width of tire.
I did some garage cleaning and found it on a shelf. Yours if you want it.

20180209_065614.jpg
20180209_065614.jpg (1.13 MiB) Viewed 5073 times
2004 TJ---3" lift, 35's, and a bunch of other junk.
2016 JK Sport 2 door---lifted, 35's, and no other junk.

User avatar
Yrjan
Peak Putters Member
Peak Putters Member
Posts: 1000
Joined: Wed Jul 25, 2012 7:41 am
Location: Pasco, WA

Re: Downsizing from a JKUR to a '97 TJ

Postby Yrjan » Fri Feb 09, 2018 11:30 am

TJDave wrote:Looks great. If you are still planning to mount your spare on top, my stock carrier is 7" deep. Should account for the wheel offset and width of tire.
I did some garage cleaning and found it on a shelf. Yours if you want it.

20180209_065614.jpg



Yes please

User avatar
scumby
Peak Putters Member
Peak Putters Member
Posts: 1768
Joined: Tue Jun 05, 2007 6:38 am
Location: Burbank

Re: Downsizing from a JKUR to a '97 TJ

Postby scumby » Fri Feb 09, 2018 5:17 pm

what are the dimensions on the box?
Lightly Lifted and Locked LJ

I'm Scumby Dammit, take it or leave it!

User avatar
Yrjan
Peak Putters Member
Peak Putters Member
Posts: 1000
Joined: Wed Jul 25, 2012 7:41 am
Location: Pasco, WA

Re: Downsizing from a JKUR to a '97 TJ

Postby Yrjan » Mon Feb 12, 2018 12:35 pm

scumby wrote:what are the dimensions on the box?



35" W x 13" H x 30" L

4.2 Cubic ft of Storage

User avatar
tobyw
Posts: 1603
Joined: Wed Mar 14, 2007 10:00 am
Location: Under the hood...

Re: Downsizing from a JKUR to a '97 TJ

Postby tobyw » Mon Feb 12, 2018 1:35 pm

Yrjan wrote:

35" W x 13" H x 30" L

4.2 Cubic ft of Storage


Sooooo... what are the other 3.7 cubic feets doing in there?
Yep, I've wheeled one of those, too...

Image

User avatar
Yrjan
Peak Putters Member
Peak Putters Member
Posts: 1000
Joined: Wed Jul 25, 2012 7:41 am
Location: Pasco, WA

Re: Downsizing from a JKUR to a '97 TJ

Postby Yrjan » Mon Feb 12, 2018 2:50 pm

tobyw wrote:
Yrjan wrote:

35" W x 13" H x 30" L

4.2 Cubic ft of Storage


Sooooo... what are the other 3.7 cubic feets doing in there?



Outside dimensions and storage I suppose... the drawer is obviously smaller than the outside dimensions...

measurements taken from the manufacturers web site.

User avatar
Yrjan
Peak Putters Member
Peak Putters Member
Posts: 1000
Joined: Wed Jul 25, 2012 7:41 am
Location: Pasco, WA

Re: Downsizing from a JKUR to a '97 TJ

Postby Yrjan » Sun Feb 18, 2018 7:05 pm

Made some progress this weekend. Thanks for coming by and helping me out Jose and Jerry.
Attachments
DCD4B642-F461-4448-876E-FAB466EC7394.jpeg
DCD4B642-F461-4448-876E-FAB466EC7394.jpeg (1.39 MiB) Viewed 5001 times
19F7E38E-8D7E-48CE-AABB-27A397FBAE5C.jpeg
19F7E38E-8D7E-48CE-AABB-27A397FBAE5C.jpeg (1.63 MiB) Viewed 5001 times
B18AF823-F862-4DAE-A986-A49CE60A6796.jpeg
B18AF823-F862-4DAE-A986-A49CE60A6796.jpeg (1.4 MiB) Viewed 5001 times
5854567B-7A6C-4F70-9CDB-B0D8776EEB1D.jpeg
5854567B-7A6C-4F70-9CDB-B0D8776EEB1D.jpeg (1.37 MiB) Viewed 5001 times

User avatar
Yrjan
Peak Putters Member
Peak Putters Member
Posts: 1000
Joined: Wed Jul 25, 2012 7:41 am
Location: Pasco, WA

Re: Downsizing from a JKUR to a '97 TJ

Postby Yrjan » Thu Feb 22, 2018 6:09 pm

More parts! Yay!
Attachments
E138C4D5-8AA8-4449-87AC-FC180AF1BCE7.jpeg
E138C4D5-8AA8-4449-87AC-FC180AF1BCE7.jpeg (1.56 MiB) Viewed 4921 times
8284C883-88CA-4C37-AE0A-7A61ACCCE0E5.jpeg
8284C883-88CA-4C37-AE0A-7A61ACCCE0E5.jpeg (959.7 KiB) Viewed 4921 times

User avatar
Yrjan
Peak Putters Member
Peak Putters Member
Posts: 1000
Joined: Wed Jul 25, 2012 7:41 am
Location: Pasco, WA

Re: Downsizing from a JKUR to a '97 TJ

Postby Yrjan » Thu Feb 22, 2018 6:59 pm

Dash mounted CB, yes sir!
Attachments
92FB5166-4F40-406A-B64A-28FFB56E6C1A.jpeg
92FB5166-4F40-406A-B64A-28FFB56E6C1A.jpeg (1.5 MiB) Viewed 4918 times

User avatar
Yrjan
Peak Putters Member
Peak Putters Member
Posts: 1000
Joined: Wed Jul 25, 2012 7:41 am
Location: Pasco, WA

Re: Downsizing from a JKUR to a '97 TJ

Postby Yrjan » Sun Feb 25, 2018 10:03 am

Got one side done completely. Working on the other side then it’s off to Trevor’s for long arm upgrade.
Attachments
3E92410E-5A26-451E-8319-47510484E4E5.jpeg
3E92410E-5A26-451E-8319-47510484E4E5.jpeg (1.09 MiB) Viewed 4889 times

User avatar
Yrjan
Peak Putters Member
Peak Putters Member
Posts: 1000
Joined: Wed Jul 25, 2012 7:41 am
Location: Pasco, WA

Re: Downsizing from a JKUR to a '97 TJ

Postby Yrjan » Mon Mar 12, 2018 8:42 am

Made some progress on mine this past weekend. Thanks for all the help Trevor. I seriously couldn’t have done it without you.
Attachments
66A68E6E-BA45-4F87-858D-4DB4F00E5877.jpeg
66A68E6E-BA45-4F87-858D-4DB4F00E5877.jpeg (1.82 MiB) Viewed 4821 times
15DC7650-8DF7-489E-AD53-1EC0F64F6672.jpeg
15DC7650-8DF7-489E-AD53-1EC0F64F6672.jpeg (1.21 MiB) Viewed 4821 times
1714A6A2-F466-4FF8-844F-6216A02ADB3F.jpeg
1714A6A2-F466-4FF8-844F-6216A02ADB3F.jpeg (1.31 MiB) Viewed 4821 times
4AEC963C-25D5-4883-B6EE-7E195798542D.jpeg
4AEC963C-25D5-4883-B6EE-7E195798542D.jpeg (1.45 MiB) Viewed 4821 times
123C97A8-4497-4033-9E31-BB6111B685FD.jpeg
123C97A8-4497-4033-9E31-BB6111B685FD.jpeg (1.19 MiB) Viewed 4821 times
8C035B96-C891-4BA4-80C4-E050CE7279B9.jpeg
8C035B96-C891-4BA4-80C4-E050CE7279B9.jpeg (1.63 MiB) Viewed 4821 times
03DEC443-5CB8-486B-92AA-1C05F480D15C.jpeg
03DEC443-5CB8-486B-92AA-1C05F480D15C.jpeg (1.34 MiB) Viewed 4821 times
38BF3F88-9ABB-46F0-8EF9-F09361691D8E.jpeg
38BF3F88-9ABB-46F0-8EF9-F09361691D8E.jpeg (1008.65 KiB) Viewed 4821 times
C2EB2C98-9799-4CF8-A020-18F31169B715.jpeg
C2EB2C98-9799-4CF8-A020-18F31169B715.jpeg (1.01 MiB) Viewed 4821 times
2E21902A-E313-4879-AAFF-4FF0D0426835.jpeg
2E21902A-E313-4879-AAFF-4FF0D0426835.jpeg (911.66 KiB) Viewed 4821 times

dutton
Posts: 16
Joined: Wed Mar 07, 2018 10:42 pm

Re: Downsizing from a JKUR to a '97 TJ

Postby dutton » Thu Mar 15, 2018 6:57 pm

Yrjan wrote:Tool box

Great idea and design for the tool box. We'll be working on buddy's TJ right after we finished installing the new rack and hard tonneau cover on the truck project. He's thinking of a smaller version of tool box at the back.

User avatar
Yrjan
Peak Putters Member
Peak Putters Member
Posts: 1000
Joined: Wed Jul 25, 2012 7:41 am
Location: Pasco, WA

Re: Downsizing from a JKUR to a '97 TJ

Postby Yrjan » Fri Mar 16, 2018 8:27 am

dutton wrote:
Yrjan wrote:Tool box

Great idea and design for the tool box. We'll be working on buddy's TJ right after we finished installing the new rack and hard tonneau cover on the truck project. He's thinking of a smaller version of tool box at the back.



why would you post a hyperlink in your response? do you work for 4wheelonline.com?

User avatar
JambaJeep
Peak Putters Member
Peak Putters Member
Posts: 104
Joined: Wed Feb 27, 2008 4:11 pm
Location: KENNEWICK

Re: Downsizing from a JKUR to a '97 TJ

Postby JambaJeep » Fri Mar 16, 2018 10:05 pm

20180316_225910.jpg
20180316_225910.jpg (823.16 KiB) Viewed 4739 times
Well that was fun! Thanks for getting some good pics! I took one of you mocking up the very first part before I started welding.
20180311_103833.jpg
20180311_103833.jpg (793.02 KiB) Viewed 4739 times

User avatar
Yrjan
Peak Putters Member
Peak Putters Member
Posts: 1000
Joined: Wed Jul 25, 2012 7:41 am
Location: Pasco, WA

Re: Downsizing from a JKUR to a '97 TJ

Postby Yrjan » Sat Aug 24, 2019 4:09 pm

Just got my hands on these beauties...
Attachments
43D1A939-578D-434C-B0F4-1B1333CB8114.jpeg
43D1A939-578D-434C-B0F4-1B1333CB8114.jpeg (1.01 MiB) Viewed 638 times

User avatar
scumby
Peak Putters Member
Peak Putters Member
Posts: 1768
Joined: Tue Jun 05, 2007 6:38 am
Location: Burbank

Re: Downsizing from a JKUR to a '97 TJ

Postby scumby » Sun Aug 25, 2019 6:23 pm

What’s the old stuff
Lightly Lifted and Locked LJ

I'm Scumby Dammit, take it or leave it!


Return to “Projects and Build-Ups”

Who is online

Users browsing this forum: No registered users and 23 guests