Gladiator v2.0

Post pics and info of your current projects.
User avatar
tobyw
Posts: 1879
Joined: Wed Mar 14, 2007 10:00 am
Location: Under the hood...

Gladiator v2.0

Postby tobyw » Tue May 16, 2023 8:22 am

I'm not even sure where to begin with the back story on this transition, but suffice it to say that priorities have shifted over time and the current situation is that I'm the oldest I've ever been, and I'm growing weary of the constant maintenance and general ownership burden of having so many vehicles around. Both kids have their own rigs now, and with me always having a tow rig and a wheeling rig (well, several wheeling rigs :oops: ), it's just silly when you step back and look at it. Not to mention the fact that in 20+ years of homeownership, I have never parked MY daily driver IN a garage, which is a particular bummer in the winters... So, consolidation was the catalyst here and although I've tried the combination of Jeep and truck before, the plan for this go-round includes a very key element to help ensure success. At least for a little while :roll: :lol2

We'll start with the basics; she's a 2023 Gladiator Rubicon with the 3.6L gasser and wonderful 8-speed automatic dressed in Granite Crystal paint. Here was the first test fit in the garage to seal the deal:

IMG_2276.JPG
IMG_2276.JPG (1.36 MiB) Viewed 9780 times


With fitment confirmed, it was time to get started on making it mine:

IMG_2409.JPG
IMG_2409.JPG (1.34 MiB) Viewed 9780 times


The first order of business was to address the most glaring shortcoming from my previous Gladiator ownership experience: entry and egress. To make it right this time, I went with a set of Rockslide Engineering slider steps:

IMG_2497.JPG
IMG_2497.JPG (1.28 MiB) Viewed 9780 times


Next up was a complete Teraflex suspension makeover including their super-trick "extended travel" rear suspension setup which replaces the low-hanging rear swaybar and stupid-long links with a torsion style bar that mounts above the frame. I also opted for the Falcon 3.1 reservoir shocks:

IMG_2500.JPG
IMG_2500.JPG (1.3 MiB) Viewed 9780 times


IMG_2509.JPG
IMG_2509.JPG (1.4 MiB) Viewed 9780 times


At this point, it was looking as though the poor Gladiator had skipped leg day at the gym, but I was stuck in supply chain purgatory awaiting what was previously unobtainium (more on this later):

IMG_2510.JPG
IMG_2510.JPG (1.73 MiB) Viewed 9780 times


With a few hours to kill, I spent the time working up a new front winch bumper:

IMG_2290.JPG
IMG_2290.JPG (1.47 MiB) Viewed 9780 times


IMG_2301.JPG
IMG_2301.JPG (1.48 MiB) Viewed 9780 times


IMG_2367.JPG
IMG_2367.JPG (1.34 MiB) Viewed 9780 times


IMG_2373.JPG
IMG_2373.JPG (1.23 MiB) Viewed 9780 times


IMG_2380.JPG
IMG_2380.JPG (1.23 MiB) Viewed 9780 times


IMG_2382.JPG
IMG_2382.JPG (1.25 MiB) Viewed 9780 times


IMG_2386.JPG
IMG_2386.JPG (1.28 MiB) Viewed 9780 times


IMG_2397.JPG
IMG_2397.JPG (1.44 MiB) Viewed 9780 times


IMG_2402.JPG
IMG_2402.JPG (1.2 MiB) Viewed 9780 times


I still have to bend up the hoop and get it welded out, but the overall idea is there...

And that brought us up to speed as of Mother's Day, as I continued to wait for the previously mentioned unobtainium :heuu:
Yep, I've wheeled one of those, too...
Image

User avatar
tobyw
Posts: 1879
Joined: Wed Mar 14, 2007 10:00 am
Location: Under the hood...

Re: Gladiator v2.0

Postby tobyw » Tue May 16, 2023 8:29 am

The factory taillights on the Gladiators are functional, but among some of the dumbest looking things I've ever seen in the automotive world. Luckily my friends at Oracle have a solution for this, and it's probably the best 7 minutes I could ever hope to spend modifying this thing:

IMG_2319.JPG
IMG_2319.JPG (1.04 MiB) Viewed 9779 times


IMG_2320.JPG
IMG_2320.JPG (971.84 KiB) Viewed 9779 times


IMG_2321.JPG
IMG_2321.JPG (1.22 MiB) Viewed 9779 times


IMG_2324.JPG
IMG_2324.JPG (1.31 MiB) Viewed 9779 times


IMG_2326.JPG
IMG_2326.JPG (1.23 MiB) Viewed 9779 times


Sitting in my office around noon on Monday, I got an email notification from the shipping company that a shipment had dropped. YAHTZEE :thu2:

IMG_2611.JPG
IMG_2611.JPG (1.27 MiB) Viewed 9779 times


IMG_2612.JPG
IMG_2612.JPG (1.53 MiB) Viewed 9779 times


IMG_2614.JPG
IMG_2614.JPG (1.49 MiB) Viewed 9779 times


IMG_2622.JPG
IMG_2622.JPG (1.62 MiB) Viewed 9779 times


Unobtainium obtained and installed 8)
Yep, I've wheeled one of those, too...

Image

User avatar
tobyw
Posts: 1879
Joined: Wed Mar 14, 2007 10:00 am
Location: Under the hood...

Re: Gladiator v2.0

Postby tobyw » Thu May 18, 2023 9:22 am

Headed for cooler climates :thu:

IMG_2655.JPG
IMG_2655.JPG (1.63 MiB) Viewed 9753 times
Yep, I've wheeled one of those, too...

Image

User avatar
tobyw
Posts: 1879
Joined: Wed Mar 14, 2007 10:00 am
Location: Under the hood...

Re: Gladiator v2.0

Postby tobyw » Mon May 22, 2023 12:50 pm

Camped near the summit of Tollgate, OR near Langdon Lake at just over 5,000ft and I'm extremely happy to report that it towed out great even with stock 4.10 gearing :shock: And even more amazing was the 13.35mpg hand calculated economy for the round trip :woot:

IMG_2670.JPG
IMG_2670.JPG (2.02 MiB) Viewed 9743 times


IMG_2671.JPG
IMG_2671.JPG (1.94 MiB) Viewed 9743 times
Yep, I've wheeled one of those, too...

Image

User avatar
tobyw
Posts: 1879
Joined: Wed Mar 14, 2007 10:00 am
Location: Under the hood...

Re: Gladiator v2.0

Postby tobyw » Wed May 24, 2023 10:33 am

So this next part may be a little controversial, but it was merely a means to an end...

Sadly, the smooth steel side saddle toolbox I used on Gladiator v1.0 is no longer in production, and I just didn't want the visual asymmetry of checkered aluminum on one side with open air on the other. To make matters worse, the Gladiator bed has the fuel filler neck protruding into the interior space, so much so that a typical crossbed toolbox will not drop in. There are a few options on the market to alleviate the situation, but they all involve a tapered bottom section that just robs too much real estate for my taste, not to mention basically forcing everything you drop into the toolbox right out to the center where it's the most difficult to reach :roll: As such, I was on the hunt for a way to make a standard box fit and about the only viable solution I could come up with was to jack the box up enough to clear the filler neck. In doing that, I was left with a cavity between the bed rail and the toolbox, which ended up seeming like a good place to stash a fire extinguisher. But, what to do on the opposite side? :? Let's fab an air tank :thu:

IMG_2555.JPG
IMG_2555.JPG (1.22 MiB) Viewed 9723 times


IMG_2697.JPG
IMG_2697.JPG (1.46 MiB) Viewed 9723 times


With that handled, it was time to figure out how to mount all of this junk. This Gladiator isn't as highly equipped as my previous unit, so I didn't have the super handy "trail rail" system inside the bed. That problem, however, was easily solved with a couple chunks of stainless Unistrut:

IMG_2636.JPG
IMG_2636.JPG (1.24 MiB) Viewed 9723 times


IMG_2637.JPG
IMG_2637.JPG (1.3 MiB) Viewed 9723 times


Time to mock up raised the toolbox location:

IMG_2638.JPG
IMG_2638.JPG (1.43 MiB) Viewed 9723 times


IMG_2639.JPG
IMG_2639.JPG (1.31 MiB) Viewed 9723 times


Not being horribly upset with things at this point, I spent a few minutes making some simple brackets for mounting the toolbox and fire extinguisher, and then mounted the air tank directly to the toolbox:

IMG_2701.JPG
IMG_2701.JPG (1.44 MiB) Viewed 9723 times


IMG_2705.JPG
IMG_2705.JPG (1.4 MiB) Viewed 9723 times


IMG_2706.JPG
IMG_2706.JPG (1.25 MiB) Viewed 9723 times


At this point I stood back and looked at the mess I'd made, and quickly realized the jacked up toolbox, while functional, left the rest of the bed just looking, well, empty. I played around with a few ideas and landed on a version of a "bed rack" that is still marinating, but the foundation has been mocked up with some 1-3/4" tube:

IMG_2719.JPG
IMG_2719.JPG (1.69 MiB) Viewed 9723 times


IMG_2722.JPG
IMG_2722.JPG (1.57 MiB) Viewed 9723 times


The plan will be to add crossbars that are just proud of the top of the toolbox to allow longer pieces of, uhhhh, whatever to be slid over the top of the box in a effort to keep as much utility as possible. The front cross bar will be fully welded in, but the rear bar will be removable with tube connectors so that I can pull it out and haul taller items if necessary. I'm out of 1-3/4" tube at the moment so hopefully I'll hop back into the project over the weekend.
Yep, I've wheeled one of those, too...

Image

User avatar
tobyw
Posts: 1879
Joined: Wed Mar 14, 2007 10:00 am
Location: Under the hood...

Re: Gladiator v2.0

Postby tobyw » Sun May 28, 2023 4:33 am

It took a little more math than I'm used to because the side rails actually taper in 1-3/4" from front-to-back, but I was able to nail the layout of the crossbars and have them sit 1/2" above the toolbox:

IMG_2752.JPG
IMG_2752.JPG (1.33 MiB) Viewed 9715 times


IMG_2758.JPG
IMG_2758.JPG (1.3 MiB) Viewed 9715 times


Then it was time to cut in the tube connectors on the rear bar to make it easily removable to taller cargo:

IMG_2760.JPG
IMG_2760.JPG (1.19 MiB) Viewed 9715 times


IMG_2761.JPG
IMG_2761.JPG (1.03 MiB) Viewed 9715 times


IMG_2762.JPG
IMG_2762.JPG (976.9 KiB) Viewed 9715 times


And finally time for paint:

IMG_2763.JPG
IMG_2763.JPG (1.43 MiB) Viewed 9715 times


Here is the finished product, although I'm already having bad ideas about adding to it :roll:

IMG_2779.JPG
IMG_2779.JPG (1.36 MiB) Viewed 9715 times


With that knocked out, I turnt my attention to the half acre of baron landscape that makes up the rear quarterpanel of the Gladiator bedside. It just looked empty and plain, so I made an attempt to jazz it up a bit and further separate my Gladiator from the crowd with a roll of matte black 3M vinyl sheet and 3/16" wide Rubicon red 3M pinstripe:

IMG_2769.JPG
IMG_2769.JPG (1.29 MiB) Viewed 9715 times


IMG_2770.JPG
IMG_2770.JPG (1.34 MiB) Viewed 9715 times


IMG_2771.JPG
IMG_2771.JPG (1.3 MiB) Viewed 9715 times


IMG_2783.JPG
IMG_2783.JPG (1.62 MiB) Viewed 9715 times


IMG_2787.JPG
IMG_2787.JPG (1.76 MiB) Viewed 9715 times


Overall I think she's looking pretty good for now. Hopefully I can put the finishing touches on the bumper this weekend and get to getting more dirt on the tires :thu:
Yep, I've wheeled one of those, too...

Image

User avatar
Roman
Peak Putters President
Peak Putters President
Posts: 2743
Joined: Wed Mar 14, 2007 5:30 pm
Location: Kennewick, WA

Re: Gladiator v2.0

Postby Roman » Mon May 29, 2023 10:50 am

BOBCAT...

User avatar
tobyw
Posts: 1879
Joined: Wed Mar 14, 2007 10:00 am
Location: Under the hood...

Re: Gladiator v2.0

Postby tobyw » Tue May 30, 2023 7:26 am

Roman wrote:BOBCAT...


Seriously? THAT is what you take away from my build threads?! :oops: :lol2 :lol2 :lol2

But since you mentioned it... After years of driving on grass to access my shop, I finally cut in a proper driveway. I added some curbing to separate the new driveway from the yard, added some landscape posts to separate the arborvitae on the other side of the new driveway, killt off the grass in preparation for gravel, and then liberally applied the aforementioned gravel:

IMG_2738.JPG
IMG_2738.JPG (1.7 MiB) Viewed 9702 times


IMG_2742.JPG
IMG_2742.JPG (1.68 MiB) Viewed 9702 times


IMG_2744.JPG
IMG_2744.JPG (2.06 MiB) Viewed 9702 times


Hence the skid steer to shake out the gravel and provide a handy paint hanger :thu:
Yep, I've wheeled one of those, too...

Image

User avatar
tobyw
Posts: 1879
Joined: Wed Mar 14, 2007 10:00 am
Location: Under the hood...

Re: Gladiator v2.0

Postby tobyw » Tue May 30, 2023 7:36 am

To complete the front bumper, I bent up a hoop with some more 1-3/4" tube and added some gussets complete with speed holes to finish it off:

IMG_2797.JPG
IMG_2797.JPG (1.43 MiB) Viewed 9702 times


IMG_2798.JPG
IMG_2798.JPG (1.41 MiB) Viewed 9702 times


IMG_2800.JPG
IMG_2800.JPG (1.43 MiB) Viewed 9702 times


After booger welding it all up and grinding the edges smoove, some black paint was applied (and yes, hung from the skid steer to dry :lol2 ):

IMG_2814.JPG
IMG_2814.JPG (1.42 MiB) Viewed 9702 times


IMG_2818.JPG
IMG_2818.JPG (1.38 MiB) Viewed 9702 times


IMG_2817.JPG
IMG_2817.JPG (1.35 MiB) Viewed 9702 times


:thu:
Yep, I've wheeled one of those, too...

Image

User avatar
Roman
Peak Putters President
Peak Putters President
Posts: 2743
Joined: Wed Mar 14, 2007 5:30 pm
Location: Kennewick, WA

Re: Gladiator v2.0

Postby Roman » Tue May 30, 2023 6:33 pm

Toby, you warrant your own project section...

User avatar
Lurch
Peak Putters Member
Peak Putters Member
Posts: 2363
Joined: Thu Nov 08, 2007 7:10 am
Location: Pasco

Re: Gladiator v2.0

Postby Lurch » Sun Jun 04, 2023 5:40 am

You can follow me.... but it's gonna hurt ;)

User avatar
tobyw
Posts: 1879
Joined: Wed Mar 14, 2007 10:00 am
Location: Under the hood...

Re: Gladiator v2.0

Postby tobyw » Wed Jun 07, 2023 9:05 am

Lurch wrote:This made me think of you.

2023-06-07_10-03-07.jpg
2023-06-07_10-03-07.jpg (86.82 KiB) Viewed 9666 times



That is way cooler than any garbage I glue together... And more expensive :shock:
Yep, I've wheeled one of those, too...

Image

User avatar
tobyw
Posts: 1879
Joined: Wed Mar 14, 2007 10:00 am
Location: Under the hood...

Re: Gladiator v2.0

Postby tobyw » Sun Aug 20, 2023 2:59 pm

The little handheld GMRS radios work remarkably well, so much so that it's pretty easy to get lazy and forego hard mounting a radio in the rig... And for the record, my laziness knows no bounds... However, I do grow tired of juggling the handheld, my phone/camera, sammich, coffee mug, etc etc etc. To eliminate one of those items off the list, I took a few minutes to finally install the Midland GMRS radio. I had to modify the chassis mounting bracket in order to squeeze it into my preferred location; nothing a little band saw and hot glue couldn't remedy:

IMG_3678.JPG
IMG_3678.JPG (1.53 MiB) Viewed 9571 times


IMG_3680.JPG
IMG_3680.JPG (1.11 MiB) Viewed 9571 times


IMG_3685.JPG
IMG_3685.JPG (1.33 MiB) Viewed 9571 times


IMG_3687.JPG
IMG_3687.JPG (1.07 MiB) Viewed 9571 times


IMG_3700.JPG
IMG_3700.JPG (1.19 MiB) Viewed 9571 times


Next I turnt my attention to the antenna. Now, I have no idea why, although I'm satisfied Jose and/or Lee probably do, but I never could get the Midland 3db gain Ghost antenna to work as well as the spindly little magnetic unit that came with the 15-watt radio... So rather than fight the feeling, I whipped up a little mount for the magnetic base and that's what I'll run this time:

IMG_3681.JPG
IMG_3681.JPG (1.31 MiB) Viewed 9571 times


IMG_3683.JPG
IMG_3683.JPG (1.11 MiB) Viewed 9571 times


IMG_3693.JPG
IMG_3693.JPG (1.3 MiB) Viewed 9571 times

(yes, the hole is actually centered above the cap screw, my OCD wouldn't allow it any other way, it's just a bad camera angle...)

IMG_3696.JPG
IMG_3696.JPG (1.19 MiB) Viewed 9571 times


:thu:
Yep, I've wheeled one of those, too...

Image

User avatar
Roman
Peak Putters President
Peak Putters President
Posts: 2743
Joined: Wed Mar 14, 2007 5:30 pm
Location: Kennewick, WA

Re: Gladiator v2.0

Postby Roman » Mon Aug 21, 2023 9:43 am

I've bought a really expensive ghost antenna only to be disappointed and went back to a whip

I'm so confused right now, I thought this was Toby Bronco season and your working on a JT...

User avatar
Dryside
Posts: 54
Joined: Wed Feb 05, 2014 7:17 pm
Location: Kennewick, WA

Re: Gladiator v2.0

Postby Dryside » Mon Aug 21, 2023 2:08 pm

It's hard to keep up. ::lol
92 YJ
88 XJ (Son's project)
75 Power Wagon
09 JKU (Balloon Animal)

User avatar
tobyw
Posts: 1879
Joined: Wed Mar 14, 2007 10:00 am
Location: Under the hood...

Re: Gladiator v2.0

Postby tobyw » Mon Aug 28, 2023 8:19 am

As previously mentioned, this Gladiator isn't as highly optioned as my '21 was and one of the items missing from the options list is the factory auxiliary switches :? There are a few aftermarket options to replicate them, and you can even go so far as to install the OEM parts, but I actually wanted something a little different this time around anyway. One of the things I miss about the 6G Bronco is the overhead mounting location of the factory auxiliary switches:

IMG_2274.JPG
IMG_2274.JPG (1.07 MiB) Viewed 9500 times


Ideally I would have developed my own mounting solution for Carling style rocker switches in a similar location above the rearview mirror, but not having adequate experience with the world of 3D printing and lacking basic fabrication skills in general, I scoured the aftermarket for a solution. Luckily, our friends at Advanced Accessory Concepts have something that passes the giggle test, and that is the Trigger 6 Shooter wireless controller:

IMG_3711.JPG
IMG_3711.JPG (1.39 MiB) Viewed 9500 times


IMG_3715.JPG
IMG_3715.JPG (1.09 MiB) Viewed 9500 times


IMG_3716.JPG
IMG_3716.JPG (1.36 MiB) Viewed 9500 times


IMG_3719.JPG
IMG_3719.JPG (1.18 MiB) Viewed 9500 times


With 12v power now readily available, I went about the task of adding a few basics in the form of a forward-facing amber LED light bar, and some rear-facing amber LED pod chase lights. I am still marinating permanent mounting solutions for the front light bar on the bumper hoop, but the current zip ties are surprising sturdy :lol2

IMG_3725.JPG
IMG_3725.JPG (1.3 MiB) Viewed 9500 times


IMG_3729.JPG
IMG_3729.JPG (1.22 MiB) Viewed 9500 times


IMG_3727.JPG
IMG_3727.JPG (1.42 MiB) Viewed 9500 times


:thu:
Yep, I've wheeled one of those, too...

Image

User avatar
tobyw
Posts: 1879
Joined: Wed Mar 14, 2007 10:00 am
Location: Under the hood...

Re: Gladiator v2.0

Postby tobyw » Sat Oct 07, 2023 5:32 pm

One of the (many) downfalls of the Gladiator platform is the departure angle, particularly when equipped with the factory tow package and receiver hitch:

IMG_4076.JPG
IMG_4076.JPG (1.78 MiB) Viewed 9036 times


To properly address the situation, two things needed to happen: the spare tire needed to find a new home; and the receiver hitch also needed to find a new home.

IMG_4140.JPG
IMG_4140.JPG (1.2 MiB) Viewed 9036 times


Over the course of several evenings involving many frosty adult beverages and several in-depth conversations with myself, it was decided that a simple approach was to be taken for the tire carrier. Initially I had wanted to ditch the tailgate and build a swing-out tire/fuel carrier... Honestly this may still happen at some point in the future, but for now, K.I.S.S.

IMG_4143.JPG
IMG_4143.JPG (1.41 MiB) Viewed 9036 times


IMG_4144.JPG
IMG_4144.JPG (1.11 MiB) Viewed 9036 times


IMG_4149.JPG
IMG_4149.JPG (1.55 MiB) Viewed 9036 times


IMG_4157.JPG
IMG_4157.JPG (1.64 MiB) Viewed 9036 times


While the paint was drying, I turnt my attention to the real elephant in the room, the pesky low-hanging receiver hitch... It had served me well and taken several hits that it truly did not deserve due to my utter lack of driving skill, but it was time for it to go away. I started by removing the heat shield and spare tire winch:

IMG_4159.JPG
IMG_4159.JPG (1.43 MiB) Viewed 9036 times


Next I dropped the rear bumper and receiver hitch:

IMG_4165.JPG
IMG_4165.JPG (1.54 MiB) Viewed 9036 times


IMG_4164.JPG
IMG_4164.JPG (1.5 MiB) Viewed 9036 times


IMG_4170.JPG
IMG_4170.JPG (1.59 MiB) Viewed 9036 times


Time for some surgical work with the plasma cutter to remove the OEM receiver from the crossmember:

IMG_4172.JPG
IMG_4172.JPG (1.48 MiB) Viewed 9036 times


IMG_4173.JPG
IMG_4173.JPG (1.71 MiB) Viewed 9036 times


With a blank slate, I started gluing together the new receiver, using the OEM crossmember as the foundation:

IMG_4175.JPG
IMG_4175.JPG (1.58 MiB) Viewed 9036 times


IMG_4179.JPG
IMG_4179.JPG (1.41 MiB) Viewed 9036 times


A dab of paint, and bolted it all back in place:

IMG_4181.JPG
IMG_4181.JPG (2.03 MiB) Viewed 9036 times


IMG_4185.JPG
IMG_4185.JPG (1.39 MiB) Viewed 9036 times


IMG_4189.JPG
IMG_4189.JPG (1.47 MiB) Viewed 9036 times


Soooooooooo much better:

IMG_4159.JPG
IMG_4159.JPG (1.27 MiB) Viewed 9036 times


I thought that I had a utility hinge on the shelf but I was apparently mistaken, so after a quick run to ACE tomorrow morning I'll have a flip-up license plate bracket to access the now-hidden hitch:

IMG_4194.JPG
IMG_4194.JPG (1.33 MiB) Viewed 9036 times


:thu:
Yep, I've wheeled one of those, too...

Image

User avatar
TJDave
Peak Putters VP
Peak Putters VP
Posts: 2806
Joined: Sat Jan 12, 2008 11:47 am
Location: East Richland

Re: Gladiator v2.0

Postby TJDave » Sun Oct 08, 2023 6:18 am

Waaaay better! :thu: Very nice. That was one of the reasons I parted with my JTR. Plus the fact that I have no collection of smaller rigs, and zero gluing skills. :oops:
2018 JLU Rubicon
Tow bar mount
Trailer hitch

User avatar
tobyw
Posts: 1879
Joined: Wed Mar 14, 2007 10:00 am
Location: Under the hood...

Re: Gladiator v2.0

Postby tobyw » Sat Oct 14, 2023 7:21 am

Finally had time to rummage through the scrap pile and came up with enough junk to cobble together the flip-up license plate bracket:

IMG_4227.JPG
IMG_4227.JPG (1.46 MiB) Viewed 8902 times


IMG_4228.JPG
IMG_4228.JPG (1.41 MiB) Viewed 8902 times


IMG_4231.JPG
IMG_4231.JPG (1.3 MiB) Viewed 8902 times


IMG_4253.JPG
IMG_4253.JPG (1.31 MiB) Viewed 8902 times


IMG_4254.JPG
IMG_4254.JPG (1.23 MiB) Viewed 8902 times


One thing that I had forgotten to address when building the new receiver hitch was the attachment of safety chains... To correct this oversight, I had to drill the holes for the quick links in situ, which is just completely barbaric. Thankfully I have a lifting device at my disposal that takes the level of barbacity down at least half a notch for such tasks:

IMG_4248.JPG
IMG_4248.JPG (1012.36 KiB) Viewed 8902 times


The last item to deal with related to the new location of the receiver is actually installing a hitch shank, as the bumper step is now directly in the way of anything that drops down. A simple off-the-shelf hitch extension, while practical and 100% functional, has a tendency to make a lot of noise because it adds a second hitch pin point and all of the associated slop. In an effort to mitigate this, I made my own extension and included a sliding wedge apparatus to snug it up inside the receiver for a completely rattle free experience:

IMG_4234.JPG
IMG_4234.JPG (1.4 MiB) Viewed 8902 times


IMG_4235.JPG
IMG_4235.JPG (1.36 MiB) Viewed 8902 times


IMG_4238.JPG
IMG_4238.JPG (1.49 MiB) Viewed 8902 times


IMG_4239.JPG
IMG_4239.JPG (1.53 MiB) Viewed 8902 times


IMG_4240.JPG
IMG_4240.JPG (1.31 MiB) Viewed 8902 times


As you tighten the nut, the wedge rides up the other end of the shank and eats up all of the slop:

IMG_4242.JPG
IMG_4242.JPG (1.23 MiB) Viewed 8902 times


I forgot to snap any pictures of the rest of the extension, but it's just a simple piece of receiver tube slid of the end of the shank, looking like pretty much every other extension on the market. :roll: Oh, and I painted it black :thu:
Yep, I've wheeled one of those, too...

Image

User avatar
tobyw
Posts: 1879
Joined: Wed Mar 14, 2007 10:00 am
Location: Under the hood...

Re: Gladiator v2.0

Postby tobyw » Mon Nov 20, 2023 2:59 pm

To further the saga of turning the Mullet into a bonafied work truck, I installed the MOPAR brake control unit in the dash. Up to this point, I had been using a bluetooth brake control unit that is handy as a pocket on as shirt, but because it uses a large control box that mounts on the trailer tongue, it's a little cumbersome to switch between multiple trailers... And it was another device that temporarily plugged into the dash that needed to be juggled with the radio mic, sammich, coffee mug, phone, etc etc etc.

IMG_4559.JPG
IMG_4559.JPG (1.19 MiB) Viewed 6943 times


The downside to the MOPAR controller is that it takes the place of the factory 12v port in the dash, which happens to be the only 12v port inside the Gladiator. There are a bevvy of USB ports, but only (1) solitary 12v port. To remedy the pending loss of this beloved piece of tech, I installed a universal 12v port in the upper dash cubby:

IMG_4552.JPG
IMG_4552.JPG (1.19 MiB) Viewed 6943 times


IMG_4554.JPG
IMG_4554.JPG (1.1 MiB) Viewed 6943 times


IMG_4561.JPG
IMG_4561.JPG (1.02 MiB) Viewed 6943 times


And then promptly put it to the test:

IMG_4562.JPG
IMG_4562.JPG (1.38 MiB) Viewed 6943 times


:thu:
Yep, I've wheeled one of those, too...

Image


Return to “Projects and Build-Ups”

Who is online

Users browsing this forum: No registered users and 10 guests