YJ mods, an on going thread.

Post pics and info of your current projects.
User avatar
bobracing
Posts: 750
Joined: Fri Jun 15, 2007 10:20 am

YJ mods, an on going thread.

Postby bobracing » Sat Jun 09, 2012 11:17 pm

Photo patch to see pictures:

http://www.jeepforum.com/forum/f176/pho ... x-4181513/


Edit:
Going to change this thread to an ongoing thread similar to TJDaves bolt on thread.


Last fall we took a stock YJ over Naches trail, EWA wagons east. Having a stock YJ resulted in something on the bottom hitting every rock and being called a lowrider by the motorcyclists we encountered.

The object:
1. To get more ground clearance by flipping the U-bolts, or just saving them from getting bent up.

2. Adding a little lift by add a leaf and shackles.

Subject: YJ with 30" tires
Image

bent U-bolts
Image

stock shackles
Image

This kit is 200 and isn't going to happen.
Image

Metal and U-bolts, Ranch and Home has a very nice selection of u-bolts.
Image

Didn't get to making these plates today, ended up having to cut the springs out and spent way to much time getting bushings out.

springs: stock, and new "hybred" pack, mix of stock and 4" springs
Image

new pack not bolted together:
Image

Tomorrow, put it back together with U-bolt flip.

Edit:
Ended up making a set of drawing for someone. This drawing is based upon what I hacked together. Use them at your own risk.

Image
Last edited by bobracing on Thu Mar 15, 2018 6:34 am, edited 7 times in total.
James
'92 YJ with a little something of everything.

User avatar
TJDave
Peak Putters VP
Peak Putters VP
Posts: 2806
Joined: Sat Jan 12, 2008 11:47 am
Location: East Richland

Postby TJDave » Sun Jun 10, 2012 8:15 am

Nice! Can't wait to see the new stance.

James, I snapped a picture of your stock YJ coming up one of the Naches Pass Trail hillclimbs at last years PUAM. It looked like it did just fine. Although from where I was at, I could not hear any rock-on-metal sounds. You were supposed to go to the left or right of that rock in the trail. :lol:

And yes, even though you can't tell in the pic, it was a hill.

Image

Image
2018 JLU Rubicon
Tow bar mount
Trailer hitch

User avatar
bobracing
Posts: 750
Joined: Fri Jun 15, 2007 10:20 am

Postby bobracing » Mon Jun 11, 2012 5:35 am

Template and rough cut
Image

Clearance: U shape for diff or tracbar mount. Corner cut off is for the shocks.
Image

1/2" round bar to stradle axle tube.
Image

Bottom plate rough cut
Image

don't use 2.5 plate, 1.75-2.00 should work good. Also a mill would have been nice for the "grooving".
Image
Image

Bolted back together
Image
Image

Stance with stock shackles and "add a leaf".
Image

Thoughts:
Front u-bolts still need to be cut off.

Got more lift than I thought but still hasn't driven it and might settle.

Back will get the U-bolt flip and some spacers removed. This will be easier because I'll just flip the existing u-bolt plates, add the rod and bolt them together. The front plate bolt holes aren't even, why new plates where made.

A mill would have been much nicer.
Probably should have drilled holes to round out some corners. All the plates were cut and ground with a hand grinder.

Would I do it again? Not sure, think it looks cleaner under the springs but a lot of work and not sure I gained much.
James
'92 YJ with a little something of everything.

User avatar
bobracing
Posts: 750
Joined: Fri Jun 15, 2007 10:20 am

Postby bobracing » Mon Jun 11, 2012 4:49 pm

A couple poser mall crawler pictures.
Still seem to be able to stuff the 30s.
and the steering wheel needs to be straightened back out.

Image

Image
James
'92 YJ with a little something of everything.

User avatar
colemancooler
Posts: 288
Joined: Wed Mar 14, 2007 4:49 pm
Location: yakima

Postby colemancooler » Tue Jun 12, 2012 9:44 am

Nice work. :thu:
shindig wheelers #36

User avatar
bobracing
Posts: 750
Joined: Fri Jun 15, 2007 10:20 am

Postby bobracing » Fri Jun 15, 2012 6:33 pm

And onto the back, where I though things would be easier, well, not really.

So, the front is now higher than the back, and this is why, along with a 3deg shim, bonus.
These were on top of the main spring and worked as a 1 1/16" lowering block. The centering pin was not removing it's self from the block, a quick trip to NAPA solved that problem.
Image

I wanted to keep the shim and decided another plate was needed to hold the centering pin. A 3/16 plate was fab. and all squished together with the centering bolt.
Image

At this point I decided that trac-bar had to go, it fought all the way requiring one bolt to be cut on both sides to remove it.
When trying to put the axle back on, I discovered the new centering bolts had a bigger head, but a 9/16 bit in the drill took care of that quickly.

Everything went back together fairly well from here. The U-bolt plates were modified with 1/2 round stock welded to them (same as front) and bottom plates were fab. earlier in the week.
Image

The new stance, think the front was lifted about 1.5-2" and the back 1", didn't take measurement.
Before
Image

After
Image

And a shot under, think shock mounts are next.
Image

Driving impression, WOW, what a difference:
The Jeep rides MUCH better, keeping the springs off the bump stops probably helps.
It's smooth, no vibrations, though the lift would have caused a problem but think it's smoother now than before.
Doesn't feel like a go-cart, can't throw it into corners but this isn't a problem for me, did I mention the trac-bars and sway-bar were removed.

I like how clean the underside looks with the U-bolt flip but again not sure it gained me much but something different.

Edit: for cost.
There is about $80 in parts, most of it ($60) in u-bolts.
Last edited by bobracing on Fri Jun 15, 2012 8:33 pm, edited 1 time in total.
James
'92 YJ with a little something of everything.

User avatar
TJDave
Peak Putters VP
Peak Putters VP
Posts: 2806
Joined: Sat Jan 12, 2008 11:47 am
Location: East Richland

Postby TJDave » Fri Jun 15, 2012 7:52 pm

Wow! Looks really good. Nice work. 8)
2018 JLU Rubicon
Tow bar mount
Trailer hitch

User avatar
bobracing
Posts: 750
Joined: Fri Jun 15, 2007 10:20 am

Postby bobracing » Fri Jun 07, 2013 6:18 pm

The brown Santa showed up.

Image
James
'92 YJ with a little something of everything.

User avatar
bobracing
Posts: 750
Joined: Fri Jun 15, 2007 10:20 am

Postby bobracing » Sun Aug 25, 2013 10:22 am

At this point I what to do a highline fender setup but have a problem deciding what size tube to use. The bender has 1, 1.5, 1.75, and 2.
Thinking that trail rigs get heavy fast and the front is heavy already, I want to use 1 or 1.5 with .095 wall and 18-20ga cover.
My problem become will 1" work and not get bent every time a tree jumps out, but will add an extra 1/2 of clearance. Also worried about 1.5 being to strong and sending all the impact back into the body and maybe bending the body.
Any thoughts?
James
'92 YJ with a little something of everything.

User avatar
tobyw
Posts: 1879
Joined: Wed Mar 14, 2007 10:00 am
Location: Under the hood...

Postby tobyw » Mon Aug 26, 2013 6:17 am

bobracing wrote:Also worried about 1.5 being to strong and sending all the impact back into the body and maybe bending the body.
Any thoughts?


IMO, this is the theoretical problem with tube fenders in the first place... They are typically a very stout structural piece that has the potential to transfer abuse rather than soak it up. That said, they are bolting to the cowl area, which is the strongest area on pretty much any vehicle on the road, and as sound as the theory seems, I don't think I've ever seen a Jeep with "transferred" damage from tube fenders. I'd rock the 1.5" with some 16ga 8)
Yep, I've wheeled one of those, too...
Image

benw
Posts: 216
Joined: Mon Apr 09, 2007 7:15 pm
Location: Yakima, WA

Postby benw » Mon Aug 26, 2013 10:38 am

tobyw wrote: I don't think I've ever seen a Jeep with "transferred" damage from tube fenders. I'd rock the 1.5" with some 16ga 8)


I've seen it a couple times

Image

Image

79chevy39.5's
Posts: 1204
Joined: Wed Apr 11, 2007 7:48 pm

Postby 79chevy39.5's » Mon Aug 26, 2013 1:11 pm

but at that point what wuold it look like with regualr fenders there as well?
my thought would be not good either way, tie some sliders in to it and be good, when do you plan to start putting the real goodys on (i hear romurs of honda d44 ect

benw
Posts: 216
Joined: Mon Apr 09, 2007 7:15 pm
Location: Yakima, WA

Postby benw » Mon Aug 26, 2013 1:52 pm

In my experience stock fenders just buckle instead of pushing in to the tub.

User avatar
bobracing
Posts: 750
Joined: Fri Jun 15, 2007 10:20 am

Postby bobracing » Sat Sep 14, 2013 4:42 pm

Pulling the previous "add a leaf" and adding a second main leaf. Thanks WT for the springs. The second main is out of a 4" pack, should be interesting.
The new goal is to lower the Jeep (unlike before) to more or less stock. Hoping for for ~1/2" of lift over stock.

Cutting off the springs eyes.
Image

One spring, with the extra main.
Image

Finished pack, we'll see how well it works. Do like the way the longer 4" spring wrapped nicely around the stock length springs.
Image
Last edited by bobracing on Sat Feb 01, 2014 7:02 pm, edited 1 time in total.
James
'92 YJ with a little something of everything.

User avatar
White trash
Posts: 1763
Joined: Tue Jan 22, 2008 9:38 pm
Location: El Pasco

Postby White trash » Sat Sep 14, 2013 5:57 pm

Sweet! It's always good to see parts missing from a previously functional vehicle. :lol:




Did you figure out if you want those wheels? I'm headed to Prosser to get some parts so I can grab them for you. I'll have a vehicle that can use the wheels you're taking off now. :D

User avatar
bobracing
Posts: 750
Joined: Fri Jun 15, 2007 10:20 am

Postby bobracing » Sat Sep 14, 2013 6:42 pm

Haven't made it that far yet.
Go a head and get them, might as well have something that fits all but one of the rigs rather and a set that doesn't fit anything.
James
'92 YJ with a little something of everything.

User avatar
White trash
Posts: 1763
Joined: Tue Jan 22, 2008 9:38 pm
Location: El Pasco

Postby White trash » Sat Sep 14, 2013 7:06 pm

Will do! They hold air too! :lol:

User avatar
bobracing
Posts: 750
Joined: Fri Jun 15, 2007 10:20 am

Postby bobracing » Sun Sep 15, 2013 4:04 pm

Does this lift make my tires look big?

Image
Last edited by bobracing on Sat Feb 01, 2014 7:03 pm, edited 1 time in total.
James
'92 YJ with a little something of everything.

User avatar
Roman
Peak Putters President
Peak Putters President
Posts: 2743
Joined: Wed Mar 14, 2007 5:30 pm
Location: Kennewick, WA

Postby Roman » Mon Sep 16, 2013 5:59 am

I spy with my little eye...Are those Tar Baby's(77 Waggy) axles in the background?

bobracing wrote:Image




What axle you putting in? It looks like a 5x5.5, but with drive flanges...Humm
the Waggy was 6 lug and pass drop, you find a D300?

bobracing wrote:Image

User avatar
bobracing
Posts: 750
Joined: Fri Jun 15, 2007 10:20 am

Postby bobracing » Mon Sep 16, 2013 6:06 am

Finally collected enough stuff and want a Jeep that can lead, follow, or get out of the way if needed. The white stuff is coming soon too and the poor Azer is just plain tired, besides it's doesn't go down tight trails well.

A shackle reversal along with a HD steering box mount.
Image

Pulling parts. Nuts inside the frame, another bad idea, while pulling the steering box, one broke off. Someone got a great idea to fix this without cutting into the frame?
Image

Image

New SR
Image

Waggy D44 mostly installed.
Image

Think the 37s will fit nicely (36" Buckshot shown).
Image
Last edited by bobracing on Sat Feb 01, 2014 7:10 pm, edited 1 time in total.
James
'92 YJ with a little something of everything.

User avatar
bobracing
Posts: 750
Joined: Fri Jun 15, 2007 10:20 am

Postby bobracing » Mon Sep 16, 2013 6:55 am

Roman wrote:I spy with my little eye...Are those Tar Baby's(77 Waggy) axles in the background?

bobracing wrote:Image


Why, Yes, yes they are.


Roman wrote:What axle you putting in? It looks like a 5x5.5, but with drive flanges...Humm
the Waggy was 6 lug and pass drop, you find a D300?

bobracing wrote:Image


I was wondering if someone would pick that up, should have known. It is a Waggy axle (not Tar Baby's) with 5 lug Ford hubs and rotors, these happen to be for sale too. The axle will be converted back to 6 lug to match the rear Rodeo D44 axle.
And Yes, it is a pass drop, and a D300 is most likely part of the equation.
James
'92 YJ with a little something of everything.

User avatar
Roman
Peak Putters President
Peak Putters President
Posts: 2743
Joined: Wed Mar 14, 2007 5:30 pm
Location: Kennewick, WA

Postby Roman » Mon Sep 16, 2013 8:01 am

Ok, so the SRS bracket takes care of the spring perch width problem on YJ's... (I never fixed this on mine, so it EATS spring bushings!)

Why pass drop?
The 300 is fine, but:
-every one I've been around sounds like a rock tumbler
-places the TC shifter away from the driver (try shifting it with your seatbelt on)
-Low range isn't as low as a 231
-would need exhaust reroute


Oh yeah... Isabel (my 4yr old) wanted me to use this little guy! :oops:

User avatar
Roman
Peak Putters President
Peak Putters President
Posts: 2743
Joined: Wed Mar 14, 2007 5:30 pm
Location: Kennewick, WA

Postby Roman » Mon Sep 16, 2013 8:11 am

bobracing wrote:Image


Looks like the pics of mine when Trashy helped me fit my Waggy front. Used his 38.5 TSL for mock up... Found I had to move the front axle forward to stay out of the back of the wheel well. And that was Shackle front, should be worse with a SRS.

User avatar
bobracing
Posts: 750
Joined: Fri Jun 15, 2007 10:20 am

Postby bobracing » Mon Sep 16, 2013 8:30 am

Roman wrote:Ok, so the SRS bracket takes care of the spring perch width problem on YJ's... (I never fixed this on mine, so it EATS spring bushings!)
Yep, needs a 3/8 spacer on the rear shackle, 3/4" difference between YJ and full width.

Why pass drop?
Because that is what I have.
The 300 is fine, but:
-every one I've been around sounds like a rock tumbler
-places the TC shifter away from the driver (try shifting it with your seatbelt on)
We did the re-bearing thing, but the Jeep is loud anyways, we'll see and again, it's what I have.

-Low range isn't as low as a 231
I'll have the 231 low range :D

-would need exhaust reroute
Exhaust fell off on the Naches trail anyways, it's just patch together right now.

Oh yeah... Isabel (my 4yr old) wanted me to use this little guy! :oops:
James
'92 YJ with a little something of everything.

User avatar
bobracing
Posts: 750
Joined: Fri Jun 15, 2007 10:20 am

Postby bobracing » Mon Sep 16, 2013 8:32 am

Roman wrote:
bobracing wrote:Image


Looks like the pics of mine when Trashy helped me fit my Waggy front. Used his 38.5 TSL for mock up... Found I had to move the front axle forward to stay out of the back of the wheel well. And that was Shackle front, should be worse with a SRS.


Yep, am worried about that, but was planning on new fender anyways just not right away. The new fenders will have a little more clearance in the back.
James
'92 YJ with a little something of everything.


Return to “Projects and Build-Ups”

Who is online

Users browsing this forum: No registered users and 6 guests