Page 1 of 1
D30/D44 ques.
Posted: Tue Jun 25, 2013 12:53 pm
by Roman
Would D44 knuckles out on a CJ D30 make the WMS wider?
Posted: Tue Jun 25, 2013 1:28 pm
by OldGreen
Yes. . well. . .not the knuckles themselves but the bearing hubs and spindle combo have the WMS about an inch farther out on each side.
Speaking for Chevy/Waggy spindles/knuckles only. Not sure what Ford knuckles/Spindles would do (the 5 hole spindles. . .???)
Posted: Tue Jun 25, 2013 2:27 pm
by 79chevy39.5's
ford knuckles ect are narrower than gm
Posted: Tue Jun 25, 2013 8:52 pm
by Roman
OldGreen wrote: . . . not the knuckles themselves but the bearing hubs and spindle combo . . .
Yeah, knuckle/hub assembly... I know you know I knew what I meant
79chevy39.5's wrote:ford knuckles ect are narrower than gm
By how much?
If you cant tell, I;ve been dreaming of doing some turd polishing!
Posted: Tue Jun 25, 2013 9:13 pm
by 79chevy39.5's
cant remember maybe have the info saved on my work computer, i know that 8 lug is 1 inch wider than the 6 lug i think about a 1/4 inch per side