well i had quite the collection of Toyota parts collecting in my garage and needed someplace to store them
a friend of mine wanted a lift kit for his 91 Toyota dd rig and steve had a 3.0 parts truck that he gots some bits off so he dropped it off this weekend while i was in seattle
so first think i did was pulled the ifs lift
then started cutting
you can see where the shackle is its under the front side of the body mount using factory spring length this is without a motor ect so i plan for the shackle to gain some angle
this is where im at now need to get some ubolts for the front end
plans are currently to use my 4.3 turbo 350 and toy case
storage unit build
- White trash
- Posts: 1763
- Joined: Tue Jan 22, 2008 9:38 pm
- Location: El Pasco
-
- Posts: 1204
- Joined: Wed Apr 11, 2007 7:48 pm
- White trash
- Posts: 1763
- Joined: Tue Jan 22, 2008 9:38 pm
- Location: El Pasco
-
- Posts: 1204
- Joined: Wed Apr 11, 2007 7:48 pm
-
- Posts: 1204
- Joined: Wed Apr 11, 2007 7:48 pm
welded the pass through tuibes all the way up tonight mounted steering box and put the front axle together and got the truck on the front tires for the first time in a week
next i will grind the all the front end stuff and mount the engine trans and tcase. but the truck needs to go outside so i can get the ifs lift on my buddys truck and do a water pump on a friends duramax
next i will grind the all the front end stuff and mount the engine trans and tcase. but the truck needs to go outside so i can get the ifs lift on my buddys truck and do a water pump on a friends duramax
- White trash
- Posts: 1763
- Joined: Tue Jan 22, 2008 9:38 pm
- Location: El Pasco
-
- Posts: 1204
- Joined: Wed Apr 11, 2007 7:48 pm
- White trash
- Posts: 1763
- Joined: Tue Jan 22, 2008 9:38 pm
- Location: El Pasco
We can make that work. The handles are simple and I'll have the pair of doors with good glass and matching locks with keys. I've got a few grills and a box that parts won't fall through unlike the one on there now.
If your mirror is like the onr on there now we're golden. I need the plastic gasket type piece to go under my rare as hens teeth chrome power mirrors.
If your mirror is like the onr on there now we're golden. I need the plastic gasket type piece to go under my rare as hens teeth chrome power mirrors.
-
- Posts: 1204
- Joined: Wed Apr 11, 2007 7:48 pm
-
- Posts: 1204
- Joined: Wed Apr 11, 2007 7:48 pm
-
- Posts: 1204
- Joined: Wed Apr 11, 2007 7:48 pm
got the drivetrain put together engine trans and tcase
started putting in the truck as a complete unit to get an idea of how everything will fit. most people say that the manifolds in factory form wont fit, but from the looks of things i can run them with a modified stock s10 ypipe
got everything in and partialy mocked up, i will be removing the seat and the carpet probably soon so i can cut the floor out and get everything high and tight
Return to “Projects and Build-Ups”
Who is online
Users browsing this forum: No registered users and 69 guests