2010 Mountain Edition JKU

Post pics and info of your current projects.
Post Reply
User avatar
Yrjan
Peak Putters Member
Peak Putters Member
Posts: 1100
Joined: Wed Jul 25, 2012 7:41 am
Location: Pasco, WA

2010 Mountain Edition JKU

Postby Yrjan » Mon Dec 29, 2014 12:48 pm

So we retired BONECRUSHER and I came home with a bright orange 2010 Mountain Edition JKU. I have now taken possession of Iulia's 2010 Rubicon. In this thread I will showcase how to spend extravagant amounts of money and have fun doing it. Stay tuned!

It comes with 37" Falcon AT's, a 6" Rubicon Express lift, Poison Spyder custom tire carrier and some really fancy embroiderd seat backs.

Image
Top
User avatar
Yrjan
Peak Putters Member
Peak Putters Member
Posts: 1100
Joined: Wed Jul 25, 2012 7:41 am
Location: Pasco, WA

Postby Yrjan » Mon Dec 29, 2014 12:52 pm

First on Iulia's wish list... hood mounts for her Hi-Lift jack, new headlights (imitation JW Speaker lights from China - photo attached...), Rubber floor mats front and rear, a new rear bumper (ORFab w/ intergrated back up lights) and some rear corner protection... stay tuned for more action and excitement!

Black with Orange Halo Rings...

Image

Image
Top
User avatar
Wrongway
Posts: 214
Joined: Fri May 30, 2008 7:38 am
Location: Kennewick

Postby Wrongway » Mon Dec 29, 2014 1:20 pm

If you need any equipment, give me a shout. LED lighting, wheels, fenders, bumpers, winches etc.. I can offer up a quote.

Bill
Top
User avatar
Yrjan
Peak Putters Member
Peak Putters Member
Posts: 1100
Joined: Wed Jul 25, 2012 7:41 am
Location: Pasco, WA

Postby Yrjan » Mon Dec 29, 2014 1:30 pm

Wrongway wrote:If you need any equipment, give me a shout. LED lighting, wheels, fenders, bumpers, winches etc.. I can offer up a quote.

Bill


EVO Front and rear fenders (builder kits), rear EVO aluminum corner skins.
Top
User avatar
Roman
Peak Putters President
Peak Putters President
Posts: 2761
Joined: Wed Mar 14, 2007 5:30 pm
Location: Kennewick, WA

Postby Roman » Mon Dec 29, 2014 1:56 pm

Yrjan wrote:In this thread I will showcase how to spend extravagant amounts of money


LOL! Love it...

Btw, those lights will look awesome pulling soap box derby cars up the hill! Is it too early to call dibs on driving it for that event?
Top
User avatar
Yrjan
Peak Putters Member
Peak Putters Member
Posts: 1100
Joined: Wed Jul 25, 2012 7:41 am
Location: Pasco, WA

Postby Yrjan » Mon Dec 29, 2014 2:07 pm

Soap Box Derby! Thats why I'm building it!
Top
User avatar
Wrongway
Posts: 214
Joined: Fri May 30, 2008 7:38 am
Location: Kennewick

Postby Wrongway » Mon Dec 29, 2014 2:35 pm

Yrjan wrote:
Wrongway wrote:If you need any equipment, give me a shout. LED lighting, wheels, fenders, bumpers, winches etc.. I can offer up a quote.

Bill


PM inc soon.. meant to PM that not post it hahaha.. whoops
Last edited by Wrongway on Mon Dec 29, 2014 2:38 pm, edited 2 times in total.
Top
User avatar
Yrjan
Peak Putters Member
Peak Putters Member
Posts: 1100
Joined: Wed Jul 25, 2012 7:41 am
Location: Pasco, WA

Postby Yrjan » Mon Dec 29, 2014 2:36 pm

Send me a full quote with shipping and tax (if applicable) to yrjan@ymail.com
Top
User avatar
Wrongway
Posts: 214
Joined: Fri May 30, 2008 7:38 am
Location: Kennewick

Postby Wrongway » Mon Dec 29, 2014 2:48 pm

If you need any http://www.rigidindustries.com/ I get excellent pricing on that equipment. Also https://www.lifetimeledlights.com/


Bill
Top
User avatar
ZMBEKLR
Posts: 185
Joined: Sun Dec 28, 2014 4:54 pm
Location: Las Vegas, NV

Postby ZMBEKLR » Mon Dec 29, 2014 2:53 pm

WOW.....very nice rig.

We were just looking at the new Raptor model, they are coming out this some cool limited editions more often now.

I would be too worried about making scratches then just having fun and rubbing on whatever was in the way :insulte

Enjoy it and look forward to seeing it in action

Drew
Top
User avatar
Wrongway
Posts: 214
Joined: Fri May 30, 2008 7:38 am
Location: Kennewick

Re: 2010 Mountain Edition JKU

Postby Wrongway » Mon Dec 29, 2014 3:09 pm

Yrjan wrote:So we retired BONECRUSHER and I came home with a bright orange 2010 Mountain Edition JKU. I have now taken possession of Iulia's 2010 Rubicon. In this thread I will showcase how to spend extravagant amounts of money and have fun doing it. Stay tuned!

It comes with 37" Falcon AT's, a 6" Rubicon Express lift, Poison Spyder custom tire carrier and some really fancy embroiderd seat backs.

Image


Would look good with some Method Beadlock Wheels.

Image

Or some Hutchinson DOT approved beadlocks.
Image
Last edited by Wrongway on Mon Dec 29, 2014 3:17 pm, edited 1 time in total.
Top
benw
Posts: 216
Joined: Mon Apr 09, 2007 7:15 pm
Location: Yakima, WA

Re: 2010 Mountain Edition JKU

Postby benw » Mon Dec 29, 2014 3:15 pm

Wrongway wrote:Would look good with some Method Beadlock Wheels.

Image


Are you a Method dealer? Send me a quote for 4 17x8 4" BS beadlocks for a JK please.
Top
User avatar
Yrjan
Peak Putters Member
Peak Putters Member
Posts: 1100
Joined: Wed Jul 25, 2012 7:41 am
Location: Pasco, WA

Postby Yrjan » Mon Dec 29, 2014 3:31 pm

DIY beadlocks. Iulia is gonna run the Dick Cepeks currently on the Rubicon as soon as I get my DIY beadlocks back from the dealership in Puyallup that were on BONECRUSHER.
Top
User avatar
Wrongway
Posts: 214
Joined: Fri May 30, 2008 7:38 am
Location: Kennewick

Postby Wrongway » Mon Dec 29, 2014 8:40 pm

Yrjan wrote:DIY beadlocks. Iulia is gonna run the Dick Cepeks currently on the Rubicon as soon as I get my DIY beadlocks back from the dealership in Puyallup that were on BONECRUSHER.


Can't beat that! I love the color btw.. Bad a$$!
Top
User avatar
Wrongway
Posts: 214
Joined: Fri May 30, 2008 7:38 am
Location: Kennewick

Re: 2010 Mountain Edition JKU

Postby Wrongway » Mon Dec 29, 2014 8:42 pm

benw wrote:
Wrongway wrote:Would look good with some Method Beadlock Wheels.

Are you a Method dealer? Send me a quote for 4 17x8 4" BS beadlocks for a JK please.


PM sent, thanks for asking
Top
User avatar
Livin4Today
Posts: 1054
Joined: Thu Jan 26, 2012 8:23 am
Location: Kennewick, WA

Postby Livin4Today » Tue Dec 30, 2014 12:41 pm

Yrjan wrote:DIY beadlocks. Iulia is gonna run the Dick Cepeks currently on the Rubicon as soon as I get my DIY beadlocks back from the dealership in Puyallup that were on BONECRUSHER.


WAIT! :scared:

So lemme get this strait, you're really gonna run those 1000 lbs diy beads that trashed Bonecrusher's front end again? REALLY? :banghead

My .02 step up to the Aluminums, and the get what you pay for confidence of a beadlock along with a manageable amount of weight... Or pre-purchase/stage another front axle for the inevitable.. :lecture
Lance

Building a capable off roader is easy, building a street legal one that you can wheel and then drive daily is the challenge...

2007 JKU, 7" RK lift, 40s, ARBs, 5.38s, Headers, Fox Coilovers, etc. http://www.Livin4Today.com
Top
Wrench
Peak Putters Member
Peak Putters Member
Posts: 1237
Joined: Sat May 30, 2009 7:23 am
Location: in a van down by the river

Postby Wrench » Tue Dec 30, 2014 1:10 pm

Or just install these:

http://innerairlock.com/beadlocks/
Paul
'84 XJ, '19JL
Top
benw
Posts: 216
Joined: Mon Apr 09, 2007 7:15 pm
Location: Yakima, WA

Postby benw » Tue Dec 30, 2014 5:14 pm

So are the 37" Falkens for sale?
Top
User avatar
Yrjan
Peak Putters Member
Peak Putters Member
Posts: 1100
Joined: Wed Jul 25, 2012 7:41 am
Location: Pasco, WA

Postby Yrjan » Tue Dec 30, 2014 5:30 pm

benw wrote:So are the 37" Falkens for sale?


As a matter of fact they are... make an offer. there is only 4 of them. the spare is 35" and is bald... ><

please note: they are bran new tires. they have exactly 300 miles on them. driven from the dealership in Puyallup to Kennewick and around town for a couple days...
Top
benw
Posts: 216
Joined: Mon Apr 09, 2007 7:15 pm
Location: Yakima, WA

Postby benw » Tue Dec 30, 2014 5:42 pm

Trade for an AEV Premium front winch bumper?
Top
User avatar
Livin4Today
Posts: 1054
Joined: Thu Jan 26, 2012 8:23 am
Location: Kennewick, WA

Postby Livin4Today » Tue Dec 30, 2014 5:48 pm

benw wrote:Trade for an AEV Premium front winch bumper?


What is it for? I know a guy (& so do you Mike) looking for a JK front winch bumper...
Lance

Building a capable off roader is easy, building a street legal one that you can wheel and then drive daily is the challenge...

2007 JKU, 7" RK lift, 40s, ARBs, 5.38s, Headers, Fox Coilovers, etc. http://www.Livin4Today.com
Top
benw
Posts: 216
Joined: Mon Apr 09, 2007 7:15 pm
Location: Yakima, WA

Postby benw » Tue Dec 30, 2014 5:57 pm

It's for a JK. I took it off my 2007 Rubicon to put a stubby bumper on. It's a very high quality bumper. http://www.aev-conversions.com/shop/jk- ... ont-bumper
Top
User avatar
Yrjan
Peak Putters Member
Peak Putters Member
Posts: 1100
Joined: Wed Jul 25, 2012 7:41 am
Location: Pasco, WA

Postby Yrjan » Tue Dec 30, 2014 6:00 pm

I'm not going to orchistrate that triple threat trade. If someone wants to talk to Bryan and see if he's interested in the bumper and what he'd pay for it then I might play ball, but for now I'm just looking for cold hard cash. Need to replace those suckers as soon as they come off and I dont have all the funds for new tires without selling those...
Top
User avatar
Yrjan
Peak Putters Member
Peak Putters Member
Posts: 1100
Joined: Wed Jul 25, 2012 7:41 am
Location: Pasco, WA

Postby Yrjan » Mon Jan 05, 2015 8:56 am

Iulia has some presents coming... ORFab rear bumper with intergrated LED back up lights should be on my doorstep when I get home tonight. Her Jeep does not have any back up lights or rear bumper because of the custom tire carrier. Also ordered EVO aluminum rear corners to cover up all the holes they made in the body installing the rear mounting plate for said tire carrier. the tire carrier is coming off this weekend and i'm swapping it for the ORFab one currently on the Rubicon. The Rubicon is getting the Poison Spyder carrier coming off her Jeep and is also getting EVO rear corners but the corners it's getting are bare steel. They are their "builder" kit and Bryansfab is going to fab up some fenders on them before I have them powder coated and installed. Should be a busy week. Also the Bushwacker flares currently on the Rubicon are going on Bryansfab's new Rubicon... I'll try and post some pictures when I can as the build progresses...
Top
OldGreen
Posts: 4503
Joined: Tue Mar 13, 2007 6:21 am
Location: coming or going?

Postby OldGreen » Mon Jan 05, 2015 10:24 am

In that one paragraph, you described enough money in accessories that the combined cost would equal more than I have in my entire Jeep.

I can't decide if I pointed that out because I am jealous or not. . . :lol:
Top
Post Reply

Return to “Projects and Build-Ups”

Who is online

Users browsing this forum: No registered users and 81 guests