JK tonneau cover version 2
JK tonneau cover version 2
Some of you may remember when I built a tonneau cover for BONECRUSHER 2 years ago. I'll be starting version 2 next week. it will be similar to this... http://www.jkowners.com/forum/showthread.php?t=182809 but mine will go from the back of the front seats all the way to the tail gate. It will have side compartments that will be accessible through the rear doors via paddle handles. the only tool I am missing for this project is a router for beveling the edges for a nice clean look. If anyone has one that I can borrow I would greatly appreciate it. Stay tuned for more action and suspense! (and some pictures too as work progresses =)
Re: JK tonneau cover version 2
I started with a cardboard template and got one side almost done. I still need to trim the sides in a bit before I hit them with the router. For some reason it's posting my pictures in a backwards order and I can't figure out how to switch them around.
- Attachments
-
- image.jpeg (1.74 MiB) Viewed 5873 times
-
- image.jpeg (1.7 MiB) Viewed 5873 times
-
- image.jpeg (1.2 MiB) Viewed 5873 times
Re: JK tonneau cover version 2
This is very cool. I loved how the last one came out. I am going to something similar to the LJ.
Re: JK tonneau cover version 2
2 side pieces are coming along. got them routed, got the tee nuts installed and the wood filler in. just need to sand them down and paint on the monsterliner. next up is the center sections... I realize they look a little rough but after I polish them up with some sand paper and paint on the monsterliner they will look amazing, trust me! =)
- Attachments
-
- IMG_5561.JPG (1.01 MiB) Viewed 5827 times
-
- IMG_5559.JPG (895.15 KiB) Viewed 5827 times
Re: JK tonneau cover version 2
How thick is the plywood and what grade is it?
I don't Text (at least not very well), I eat Blackberrys, and I only Twitter after sex...
Re: JK tonneau cover version 2
SPR wrote:How thick is the plywood and what grade is it?
Not sure about the grade. There was one other one quite a bit more expensive than this one. It's 3/4" and was like $20 a sheet.
Re: JK tonneau cover version 2
It looked a lot thicker.
I don't Text (at least not very well), I eat Blackberrys, and I only Twitter after sex...
Return to “Projects and Build-Ups”
Who is online
Users browsing this forum: No registered users and 7 guests