The Club meeting for July is Saturday 11th at 5pm and will be held in our pasture. See the Member’s Section Or message SPR For details
Post whatever here.
1 post • Page 1 of 1
After looking and reading very little about the EGR system on my 90 i get the bright idea to basically try an egr delete and see how it runs. I had the manifold off to replace the cracked exhaust manifold with a pacesetter 2.5" header so this was a perfect time to plug the hole in the bottom of the air manifold and pull the EGR valve off and build a block off plate. Got the plate built and bolted in place and wired up the O2 sensor. I also disconected the EGR solenoid and plugged the connections on the manifold where the vacume hose connected. So i thought i had everything covered but when i fired it up she is running ruff at idle and she smoothes out a little with throttle. Guess i should have asked u guys first but is this even possible and will the engine run a little better without all the emissions crap. Help me out here guys...
Who is online
Users browsing this forum: No registered users and 1 guest