Need to borrow a 1.5"/ft 7* tapered reamer

[JambaJeep]

I Have a FJ80 tie rod end high steer setup on my Toyota but im swithing to chevy 1 ton tie rod ends. FJ TRE's cost $30 each and the chevys cost $9 and they are much bigger. I have my chevy TRE setup using only 2 part numbers so I can carry 1 och each TRE and be covered for spares on the trail.

Anyways, I need to borrow the tapered reamer to ream my steering arms and pitman arm. Thanks in advance

my setup is 2x MES2234R - right hand threads


2x MES2010L - left hand threads

[Roman]

You get your new ones already?

[JambaJeep]

Yes I did. I still need to run to twin city metals and get my inner sleeve material for the tie rod and drag link. And of course ream my steering arms..

[JambaJeep]

I bought a 6 fluted spiral tapered reamer. Will do nicely in a 1/2" drill