11/28 Christmas Tree Run
Truck run leaving Dayton fairgrounds at 10 am Tucannon/Camp Wootton
Tree hunting, camp fire and snacks

2007 Sahara

Post pics and info of your current projects.
Post Reply
User avatar
Yrjan
Peak Putters Member
Peak Putters Member
Posts: 1110
Joined: Wed Jul 25, 2012 7:41 am
Location: Pasco, WA

Postby Yrjan » Sat Jul 19, 2014 7:09 am

Image
Image
Image
Top
User avatar
Yrjan
Peak Putters Member
Peak Putters Member
Posts: 1110
Joined: Wed Jul 25, 2012 7:41 am
Location: Pasco, WA

Postby Yrjan » Sun Jul 27, 2014 9:10 am

Many thanks again to www.bryansfab.com for helping a brother out. New heavy duty track bar bracket.

Image

Image

Image

Image

Image
Top
User avatar
Yrjan
Peak Putters Member
Peak Putters Member
Posts: 1110
Joined: Wed Jul 25, 2012 7:41 am
Location: Pasco, WA

Postby Yrjan » Tue Jul 29, 2014 6:32 pm

Image
Top
User avatar
Lurch
Posts: 2365
Joined: Thu Nov 08, 2007 7:10 am
Location: Pasco

Postby Lurch » Tue Jul 29, 2014 8:37 pm

We need a like button.
You can follow me.... but it's gonna hurt ;)
Top
User avatar
Yrjan
Peak Putters Member
Peak Putters Member
Posts: 1110
Joined: Wed Jul 25, 2012 7:41 am
Location: Pasco, WA

Postby Yrjan » Tue Jul 29, 2014 8:52 pm

Lurch wrote:We need a like button.


Image
Top
User avatar
Yrjan
Peak Putters Member
Peak Putters Member
Posts: 1110
Joined: Wed Jul 25, 2012 7:41 am
Location: Pasco, WA

Postby Yrjan » Tue Jul 29, 2014 8:55 pm

Powder coat silver. Rattle can the inners black to match the wheels and BAM! BONECRUSHER gets a facelift. Approx 2 weeks till I get em back from powder coating. Hardware purchased already.
Top
User avatar
Yrjan
Peak Putters Member
Peak Putters Member
Posts: 1110
Joined: Wed Jul 25, 2012 7:41 am
Location: Pasco, WA

Postby Yrjan » Tue Jul 29, 2014 8:56 pm

Elaborate on the new track bar bracket... Eliminated the stabalizer. No need for it now. No death wobble at any speed.
Top
User avatar
Roman
Peak Putters President
Peak Putters President
Posts: 2865
Joined: Wed Mar 14, 2007 5:30 pm
Location: Kennewick, WA

Postby Roman » Wed Jul 30, 2014 6:44 am

If it still bolts on, I would run it. If it's not needed right now, then it will just be along for the ride. But there will be a lot of weight on the wheel ends with those new bead locks.
Top
User avatar
Jafo
Posts: 636
Joined: Sun May 27, 2007 5:34 pm
Location: Tri-shitties, Wa

Postby Jafo » Wed Jul 30, 2014 7:39 pm

Roman wrote:If it still bolts on, I would run it. If it's not needed right now, then it will just be along for the ride. But there will be a lot of weight on the wheel ends with those new bead locks.


Also when your bushings, heims, whatever your running start to wear the stabilizer will help.
2018 JLU-R work in progress.


WRWP360
Top
User avatar
Roman
Peak Putters President
Peak Putters President
Posts: 2865
Joined: Wed Mar 14, 2007 5:30 pm
Location: Kennewick, WA

Postby Roman » Thu Jul 31, 2014 7:04 am

Artec Industries wrote:Allows rotation of steering dampener to top side of tie rod for greater clearance.


Huh, who knew...
Top
User avatar
Yrjan
Peak Putters Member
Peak Putters Member
Posts: 1110
Joined: Wed Jul 25, 2012 7:41 am
Location: Pasco, WA

Postby Yrjan » Thu Jul 31, 2014 9:11 am

Huh?!?!
Top
User avatar
Yrjan
Peak Putters Member
Peak Putters Member
Posts: 1110
Joined: Wed Jul 25, 2012 7:41 am
Location: Pasco, WA

Postby Yrjan » Thu Jul 31, 2014 9:14 am

This is exactly the way it was put on. Not sure how they install the damper...

Image
Top
User avatar
Roman
Peak Putters President
Peak Putters President
Posts: 2865
Joined: Wed Mar 14, 2007 5:30 pm
Location: Kennewick, WA

Postby Roman » Thu Jul 31, 2014 9:25 am

Damper must bolt thru the upper hole, and mounts on top of drag link (or what ever it was bolted to before)
Top
User avatar
Livin4Today
Posts: 1054
Joined: Thu Jan 26, 2012 8:23 am
Location: Kennewick, WA

Postby Livin4Today » Thu Jul 31, 2014 10:37 am

Roman wrote:Damper must bolt thru the upper hole, and mounts on top of drag link (or what ever it was bolted to before)


That would be my guess also...
Lance

Building a capable off roader is easy, building a street legal one that you can wheel and then drive daily is the challenge...

2007 JKU, 7" RK lift, 40s, ARBs, 5.38s, Headers, Fox Coilovers, etc. http://www.Livin4Today.com
Top
User avatar
Yrjan
Peak Putters Member
Peak Putters Member
Posts: 1110
Joined: Wed Jul 25, 2012 7:41 am
Location: Pasco, WA

Postby Yrjan » Thu Jul 31, 2014 1:03 pm

There is no way to utilize that upper bolt hole. Me and Bryan looked at every way and it's impossible.
Top
User avatar
Livin4Today
Posts: 1054
Joined: Thu Jan 26, 2012 8:23 am
Location: Kennewick, WA

Postby Livin4Today » Fri Aug 01, 2014 9:35 am

Yrjan wrote:There is no way to utilize that upper bolt hole. Me and Bryan looked at every way and it's impossible.


Agreed, had same discussion last night, just go hydraulic assist... Wait that's what I want... LOL
Lance

Building a capable off roader is easy, building a street legal one that you can wheel and then drive daily is the challenge...

2007 JKU, 7" RK lift, 40s, ARBs, 5.38s, Headers, Fox Coilovers, etc. http://www.Livin4Today.com
Top
User avatar
Roman
Peak Putters President
Peak Putters President
Posts: 2865
Joined: Wed Mar 14, 2007 5:30 pm
Location: Kennewick, WA

Postby Roman » Fri Aug 01, 2014 11:27 am

JK Lance wrote:... just go hydraulic assist... Wait that's what I want... LOL


Don't go giving the boy ideas!
Top
User avatar
Yrjan
Peak Putters Member
Peak Putters Member
Posts: 1110
Joined: Wed Jul 25, 2012 7:41 am
Location: Pasco, WA

Postby Yrjan » Mon Aug 04, 2014 6:21 pm

Rings done. $14.00 ea. look pretty good. Gonna be about 2-3 weeks before install though.

Image

Image

Image
Top
OldGreen
Posts: 4506
Joined: Tue Mar 13, 2007 6:21 am
Location: coming or going?

Postby OldGreen » Mon Aug 04, 2014 6:47 pm

Pretty cool, but you are going to hate the drive home after a snow run.
Top
User avatar
Yrjan
Peak Putters Member
Peak Putters Member
Posts: 1110
Joined: Wed Jul 25, 2012 7:41 am
Location: Pasco, WA

Postby Yrjan » Mon Aug 04, 2014 8:06 pm

OldGreen wrote:Pretty cool, but you are going to hate the drive home after a snow run.


The thought is I won't be driving it home anymore. It's getting trailer treatment from here forward.
Top
User avatar
Yrjan
Peak Putters Member
Peak Putters Member
Posts: 1110
Joined: Wed Jul 25, 2012 7:41 am
Location: Pasco, WA

Postby Yrjan » Sun Aug 24, 2014 9:50 am

Pulled the front cover off of BONECRUSHER. Initial inspection seems that it was a bearing failure.
Top
OldGreen
Posts: 4506
Joined: Tue Mar 13, 2007 6:21 am
Location: coming or going?

Postby OldGreen » Sun Aug 24, 2014 12:37 pm

Pics?
Top
User avatar
Yrjan
Peak Putters Member
Peak Putters Member
Posts: 1110
Joined: Wed Jul 25, 2012 7:41 am
Location: Pasco, WA

Postby Yrjan » Mon Aug 25, 2014 5:47 am

Nope. Pinion gear... Rear is fine. Buying replacement 4:10. Budget fix otherwise I might have to wait several months to re-gear. Jeep is at Bryansfab and I'm ordering gears today. I'm off next weekend so hopefully we will be installing new front gears and beadlocks.
Top
User avatar
Yrjan
Peak Putters Member
Peak Putters Member
Posts: 1110
Joined: Wed Jul 25, 2012 7:41 am
Location: Pasco, WA

Postby Yrjan » Mon Aug 25, 2014 5:50 am

The cause is obvious. Rookie mistake on my part. Reverse in super low range with front wheels turned sleightly and bound up. It's safe to say I'm an idiot but C'est la vie...
Top
User avatar
Livin4Today
Posts: 1054
Joined: Thu Jan 26, 2012 8:23 am
Location: Kennewick, WA

Postby Livin4Today » Mon Aug 25, 2014 6:41 am

Dude, cheap fix is grabbing the Dana 30 4.10s off CL for like $50...
Lance

Building a capable off roader is easy, building a street legal one that you can wheel and then drive daily is the challenge...

2007 JKU, 7" RK lift, 40s, ARBs, 5.38s, Headers, Fox Coilovers, etc. http://www.Livin4Today.com
Top
Post Reply

Return to “Projects and Build-Ups”

Who is online

Users browsing this forum: No registered users and 0 guests